80,000 ft-lb Impact Wrench !

Before I retired from Aluminum rolling mills, we used 3" impact wrenches that had to be lifted into position using an overhead crane for removing and installing nuts from rolling mill drive gearboxes, motors, foundations and other large equipment. Also used a lot of Hitorc equipment as well.
The latest and greatest products we used were Superbolt tension nuts for large bolts and studs.
 
I think Mavis Tire might have used it on my van when I had it there years ago for tires. It took a HF 25" breaker bar and a 4' pipe to get the lug nuts off when it came time for me to rotate the tires!!
 
Back
Top