Originally Posted By: Patman
Originally Posted By: oil_film_movies
Fram has the HP18 and HP19 oil filters for these applications. Fram Racing oil filters have good efficiency, very robust, silicone ADBV, expensive at $20 each though.
Sized right in the middle of the WL10290 (PF64, short) and the WL10255 (PF63E, very long) is the Wix 57502
http://www.wixfilters.com/Lookup/Exactmatch.aspx?PartNo=57502 and all have the required 22 psi bypass threshold. All three only differ in their lengths. You can use any of them IF your engine has room for the lengths.
NAPA Gold equivalents also exist for them. Part numbers 100290, 100255, and 7502.
Notice if your GM Owner's Manual says you need a UPF64R, that one has a high 35 psi bypass, so technically you can't use any of the Wix's or NAPA oil filters in that case.
Don't forget about the
Wix 51372, which is only about 0.4" longer than the PF64 and also has the 22 psi bypass. The NAPA Gold equivalent is the 1372.
I know I said in the past I didn't want to run the oversize filter on my Corvette, but for just one interval I think I might go with the 1372, until the proper size (100290) hits the stores.
Be careful using the 51372.
Its too wide. My PF64 (GM 1.5L turbo '18 Equinox) application won't quite fit the extra 0.7" diameter. Maybe yours will.
I was only considering the same-diameter, extra height options. That one is good if you've got the room for it.