I got a virgin sample of High Performance Lubricants 30 grade flush oil. This is an ester oil intended to be blended 25-50% with another oil for short intervals to slowly clean a dirty engine. The add pack is fairly robust. The KV100 is just barely a 30 grade by design to make it useful with blending with 20 or 30 grade oils. I'm currently running this at 50% concentration in my KA24E.
Elemental Analysis
Fe - 2
Cr - 0
Ni - 0
Al - 5
Cu - 0
Pb - 1
Sn - 1
Cd - 0
Ag - 0
V - 0
Si - 7
Na - 1
K - 1
Ti - 0
Mo - 97
Sb - 0
Mn - 0
Li - 0
B - 254
Mg - 542
Ca - 3264
Ba - 0
P - 1042
Zn - 1134
KV100 = 9.4 cSt
TBN = 9.23
Oxidation = 113
Nitration = 11
Elemental Analysis
Fe - 2
Cr - 0
Ni - 0
Al - 5
Cu - 0
Pb - 1
Sn - 1
Cd - 0
Ag - 0
V - 0
Si - 7
Na - 1
K - 1
Ti - 0
Mo - 97
Sb - 0
Mn - 0
Li - 0
B - 254
Mg - 542
Ca - 3264
Ba - 0
P - 1042
Zn - 1134
KV100 = 9.4 cSt
TBN = 9.23
Oxidation = 113
Nitration = 11