What exactly are you tightening with these low numbers? Unless its a transmission band or bearing preload this tool is probably the last thing you need.
Turbo Intake Clamps. 3.5 Nm, 6 Nm fresh intake tube, Air filter housing 6Nm
Lots of weird low values Trav, but I don't trust myself that's why I want this for piece of mind, I bet with many things you go by feel...
For most of that stuff I just palm a very small ratchet or a ratchet handle driver if there is room. You might find the torque wrench is also too cumbersome.
This ships to use and if you just palm it and only slightly twist it wont over tighten. This is very very small.
Originally Posted by Trav
For most of that stuff I just palm a very small ratchet or a ratchet handle driver if there is room. You might find the torque wrench is also too cumbersome.
This ships to use and if you just palm it and only slightly twist it wont over tighten. This is very very small.
The first one is about 3.5" the second one is about 2-3/4". Hazet sells replacement grips and rebuild kits for all ratchets.
I should have said ships to USA not use.