Since these are NLA, anyone have a line on a replacement filter that's compatible. Same size or larger, same gasket size, same thread. Thanks.
Replacements for Purolator 24458?
- Thread starter Reelizmpro
- Start date
- Status
- Joined
- Sep 28, 2002
- Messages
- 39,798
This is sorta odd. Wix has no x-ref for this filter. But if you put in Baldwin's xref you get the 51344 (NAPA 1344).
Wix
Part Number: 51344
UPC Number: 765809513440
Principal Application: Various Equipment w/ Isuzu & Yanmar Engines
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.069
Outer Diameter Top: 3.242
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=22/40
Burst Pressure-PSI: 360
Max Flow Rate: 9-11 GPM
Nominal Micro Rating: 19
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.490 2.200 0.148
B161-S
Descriptions : Microlite Full-Flow Lube Spin-on
Contains : Anti-Drainback Valve
20 PSI By-Pass Valve
Fits : Ford, Honda, Mazda, Porsche Automotive; Kubota Engines
Replaces : Ford D87Z-6731-A; Mazda 8173-23-802
Thread : M20 x 1.5
O.D. : 3 1/32 (77.0)
Length : 4 1/16 (103.2)
I.Gskt : G481
L20073 is an alternative. Purolator says that it's not an exact match.
Part Number: 51347
UPC Number: 765809513471
Principal Application: Ford Courier (72-82), Hyster, Komatsu, Merc. Bobcat (75-79), Pinto (75-79), Thermo-King, Yanmar Excavators
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.828
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Burst Pressure-PSI: 325
Max Flow Rate: 9-11 GPM
Nominal Micro Rating: 20
Gasket Diameters
Number O.D. I.D. Thk.
15597 2.734 2.430 0.226
The gasket's a little different.
Baldwin
PART NUMBER: B199
Descriptions : Microlite Full-Flow Lube Spin-on
Contains : Anti-Drainback Valve
8 PSI By-Pass Valve
Fits : Ford, Mercury Automotive
Replaces : Ford D2PJ-6714-AA
Thread : M20 x 1.5
O.D. : 3 (76.2)
Length : 5 1/8 (130.2)
I.Gskt : G449-B
btw- when Purolator discontinues a filter, it's usually noted when you look it up. This has no such notation on their site
Wix
Part Number: 51344
UPC Number: 765809513440
Principal Application: Various Equipment w/ Isuzu & Yanmar Engines
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.069
Outer Diameter Top: 3.242
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=22/40
Burst Pressure-PSI: 360
Max Flow Rate: 9-11 GPM
Nominal Micro Rating: 19
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.490 2.200 0.148
B161-S
Descriptions : Microlite Full-Flow Lube Spin-on
Contains : Anti-Drainback Valve
20 PSI By-Pass Valve
Fits : Ford, Honda, Mazda, Porsche Automotive; Kubota Engines
Replaces : Ford D87Z-6731-A; Mazda 8173-23-802
Thread : M20 x 1.5
O.D. : 3 1/32 (77.0)
Length : 4 1/16 (103.2)
I.Gskt : G481
L20073 is an alternative. Purolator says that it's not an exact match.
Part Number: 51347
UPC Number: 765809513471
Principal Application: Ford Courier (72-82), Hyster, Komatsu, Merc. Bobcat (75-79), Pinto (75-79), Thermo-King, Yanmar Excavators
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.828
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Burst Pressure-PSI: 325
Max Flow Rate: 9-11 GPM
Nominal Micro Rating: 20
Gasket Diameters
Number O.D. I.D. Thk.
15597 2.734 2.430 0.226
The gasket's a little different.
Baldwin
PART NUMBER: B199
Descriptions : Microlite Full-Flow Lube Spin-on
Contains : Anti-Drainback Valve
8 PSI By-Pass Valve
Fits : Ford, Mercury Automotive
Replaces : Ford D2PJ-6714-AA
Thread : M20 x 1.5
O.D. : 3 (76.2)
Length : 5 1/8 (130.2)
I.Gskt : G449-B
btw- when Purolator discontinues a filter, it's usually noted when you look it up. This has no such notation on their site
Thanks for the info. I tried the 20073 and it leaked because the gasket was too large for the mounting surface on my B16A powered CRX. The 24458 worked perfectly though, I wonder why they would discontinue it?? Pep Boys says the 24458 was replaced by 24459 but they didn't have that filter instock. Any info on this?
Just looked on Purolator's site and they show that the 24458 is superceded by the smaller 14459.
[ May 09, 2006, 12:31 AM: Message edited by: Reelizmpro ]
Just looked on Purolator's site and they show that the 24458 is superceded by the smaller 14459.
[ May 09, 2006, 12:31 AM: Message edited by: Reelizmpro ]
The 20073 works perfect on a 1996-2000 Civic (DX, LX, EX and Si)
The 24458 was discontinued early last year, some people have said that Sears with tire center/quick lube still have some leftover 24458.
The 24458 was discontinued early last year, some people have said that Sears with tire center/quick lube still have some leftover 24458.
BTW,
The Mobil M-105 oil filter is oversized for Hondas/Acuras.
I went to PepBoys asking for the Proline 24458 (made by Purolator) and they had them .....but they we taken off the shelf and behind the counter. PepBoys was using them for fleet sales.
The Mobil M-105 oil filter is oversized for Hondas/Acuras.
I went to PepBoys asking for the Proline 24458 (made by Purolator) and they had them .....but they we taken off the shelf and behind the counter. PepBoys was using them for fleet sales.
Purolator Oversize Guide
The list doesnt include gasket size, but you can have an idea of what threads up.
The list doesnt include gasket size, but you can have an idea of what threads up.
I may have found a solution for you. If you go to the Fram site x-reference, they give you the part number PH3953a (14459 equivalent) and the PH5046. If you then go to the Wix filter site x-reference, they give you 51568 as their match for the PH5046.
This 51568 filter is 3.234" diameter and 4" tall, slightly larger than the 24458, with a relief valve setting of 16psi.
If you then go to the purolator site and type in 51568, it gives you L24458 as the x-reference! Also, the Wix 51344 x's with the L24458 also.
Given all that, you may want to try a Wix 51568 or 51344. If you must stick with Purolator, then 14459 may be your only option, unless you have room to go with the VERY oversized 14619 (slightly larger gasket here too).
This 51568 filter is 3.234" diameter and 4" tall, slightly larger than the 24458, with a relief valve setting of 16psi.
If you then go to the purolator site and type in 51568, it gives you L24458 as the x-reference! Also, the Wix 51344 x's with the L24458 also.
Given all that, you may want to try a Wix 51568 or 51344. If you must stick with Purolator, then 14459 may be your only option, unless you have room to go with the VERY oversized 14619 (slightly larger gasket here too).
My Luber-Finer catalog cross-references the Purolator 24458 to a L-F #PH2808, which x-ref's to a Wix #51334. Yes, 51334 (NOT 51344).
Here are the specs on the Wix 51334:
Part Number: 51334
UPC Number: 765809513341
Principal Application: Acura (88-05), Chevrolet (85-88), Dodge (91-96), Ford (88-96), Honda (72-05), Hyundai (89-06), Isuzu (85-04), Kia (01-06), Mercury (87-91), Mitsubishi (89-98), Subaru (87-06), John Deere, Kobelco, Komatsu, Kubota, Onan, Toro & Yanmar Diesel
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.194
Outer Diameter Top: 3.252
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=22/40
Burst Pressure-PSI: 280
Max Flow Rate: 9-11 GPM
Nominal Micro Rating: 19
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233
Let us know how it works out for you.
Here are the specs on the Wix 51334:
Part Number: 51334
UPC Number: 765809513341
Principal Application: Acura (88-05), Chevrolet (85-88), Dodge (91-96), Ford (88-96), Honda (72-05), Hyundai (89-06), Isuzu (85-04), Kia (01-06), Mercury (87-91), Mitsubishi (89-98), Subaru (87-06), John Deere, Kobelco, Komatsu, Kubota, Onan, Toro & Yanmar Diesel
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.194
Outer Diameter Top: 3.252
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=22/40
Burst Pressure-PSI: 280
Max Flow Rate: 9-11 GPM
Nominal Micro Rating: 19
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233
Let us know how it works out for you.
- Joined
- Sep 28, 2002
- Messages
- 39,798
24459 (w/an "L" or "PL" en frente de, btw) doesn't exist according to Wix, Baldwin, Donaldson, and Purolator.
Search Results for L24459
This part number was not found.
Please check to make sure you have entered the part number correctly.
If you have entered it correctly and need further assistance please call
1-800-949-6698. Hours of operation: 8:00am to 5:00pm EST.
Help us research this part by providing more information about your part
The 24458 was replaced in their catalog by the 14459, not 24459.
I use the PL24458 for my 1988 Mazda 323GTX and I'm bummed that they discontinued it.
Anyone up for petitioning Purolator to keep it around?
AFAIK, the only car the filter is speced for is a 1988 Mazda MX6 turbo. Maybe the 626 and Probe GT?
On the mazda 323 forum someone mentioned thast the 1990-95 Corvette ZR-1 filter fit. Purolator p/n (P)L14619. It's about as tall as a L24458 and has the same OD as a PH8A/FL1A/L30001 Ford filter. Same gasket size as a Ford filter too, bigger than the L24458, the L14619 gasket ID matches the L24458 OD...
But looking at the spec's in the other thread it looks like the L20073 would be the best replacement for the L24458.
What do you guys think?
edit: And I forgot to mention that I got a M1 M-104 filter that looked about the same size as a PL24458. That's what Mobil says fits a '88 Mazda 626 turbo.
Here's a pic of a PL14619 (on the left) and a PL24458 on the right.
You can click on the pics to see them fullsize.
And here's a shot of the mounting surface. I lost the gasket to the PL24485 so I just colored it in with pencil to make it easier to see.
Anyone up for petitioning Purolator to keep it around?
AFAIK, the only car the filter is speced for is a 1988 Mazda MX6 turbo. Maybe the 626 and Probe GT?
On the mazda 323 forum someone mentioned thast the 1990-95 Corvette ZR-1 filter fit. Purolator p/n (P)L14619. It's about as tall as a L24458 and has the same OD as a PH8A/FL1A/L30001 Ford filter. Same gasket size as a Ford filter too, bigger than the L24458, the L14619 gasket ID matches the L24458 OD...
But looking at the spec's in the other thread it looks like the L20073 would be the best replacement for the L24458.
What do you guys think?
edit: And I forgot to mention that I got a M1 M-104 filter that looked about the same size as a PL24458. That's what Mobil says fits a '88 Mazda 626 turbo.
Here's a pic of a PL14619 (on the left) and a PL24458 on the right.
You can click on the pics to see them fullsize.
And here's a shot of the mounting surface. I lost the gasket to the PL24485 so I just colored it in with pencil to make it easier to see.
I have used the Wix 51344 on my 02 Accord l4 ever since the purolators were discontinued..Pete
- Status
