Properly Charging Jumpstart Battery

Status
Not open for further replies.
Joined
Sep 7, 2010
Messages
2,235
Location
Oswego, IL
I have a friend with one of the jumpstart batteries. ( like this one: http://www.amazon.com/Duracell-DJUMP-17-...674&sr=8-23) But he has left it uncharged (for possibly years?) in his trunk thinking it could just be left forever and it would be there when he needed it. Now, there is a HUGE YELLOW STICKER which says in BIG BOLD LETTERS to keep this charged by plugging it in every few months. But, being a numb-skull, he neglected to do this. I plugged it in last night and it doesn't seem to be charging correctly. It has been charging for 24 hours and the display on the front, which registers percent of charge, is constantly changing from between 3 to 7 percent. It has a little light on it, and when I first found it yesterday the battery was so dead it couldn't even turn on the light. Is there a proper way to recharge this? Should I just leave it plugged in for a few days and see what happens?
 
I would leave it plugged in a little longer, but watch it closely. I bet it is probably shot. These jumpers use a regular lead-acid battery and when left to die, they don't recover.
 
Some smart chargers have a feature that sorta de-sulphulates the battery. I have brought back a few old batteries with my Canadian Tire Nascar Intelligent Charger.

It doesn't always work, but if you have a regular 12V battery charger, possibly disassemble the jumpstarter and just hook up a regular charger directly to the battery inside.
 
When I worked at an interstate battery store, we sometimes had luck rejuvenating old batteries by using a CTEK charger.
 
add a full size aspirin to each cell.after one day attempt a recharge.Then allow the battery to sit with charger removed for one week.Now try another recharge.This has worked for me most of the time.
 
Status
Not open for further replies.
Back
Top Bottom