Jarpin Joined Feb 25, 2009 Messages 325 Location TX Nov 7, 2022 #1 This is just a question of type...and ease of removal after 8+ years in high heat application. I have both a Grey looking paste and a Copper colored paste. Which is best? Thanks.
This is just a question of type...and ease of removal after 8+ years in high heat application. I have both a Grey looking paste and a Copper colored paste. Which is best? Thanks.
B brianl703 Joined May 7, 2004 Messages 14,966 Location Nokesville, VA Nov 7, 2022 #2 Bosch and NTK oxygen sensors come with factory-applied gray/silver anti-seize. Denso oxygen sensors come with a packet of copper anti-seize you have to apply yourself. So both colors are used. Not sure it matters.
Bosch and NTK oxygen sensors come with factory-applied gray/silver anti-seize. Denso oxygen sensors come with a packet of copper anti-seize you have to apply yourself. So both colors are used. Not sure it matters.
Trav Joined Nov 20, 2006 Messages 32,678 Location MA, Mittelfranken.de Nov 7, 2022 #3 If only doing a couple of O2 sensors and a few bolts get a small tube of nickel anti seize. https://www.amazon.com/Permatex-77134-Nickel-Anti-Seize-Lubricant/dp/B007NJOEAI
If only doing a couple of O2 sensors and a few bolts get a small tube of nickel anti seize. https://www.amazon.com/Permatex-77134-Nickel-Anti-Seize-Lubricant/dp/B007NJOEAI