I've used 13/16" socket without issue as it's slightly smaller than a 21mm, I don't have a 20mm thin wall chrome.
New tool thread
- Thread starter jhellwig
- Start date
CleanSump
Site Donor 2026
Sunex 21mm crow's foot for the axle nut on Yamahas when adjusting the belt or changing the tire. No pic 'cause I'm lazy today.
Needed another work bench, Found this Durham HWB-3672-95 14,000 pound capacity bench on facebook marketplace for $700, Welded on some decent castors, Need to mount a Wilton machinist vise & Kent Moore transmission fixture holder.
4wd
$50 site donor 2026
Nice one ! Needing another work bench is a good thing !Needed another work bench, Found this Durham HWB-3672-95 14,000 pound capacity bench on facebook marketplace for $700, Welded on some decent castors, Need to mount a Wilton machinist vise & Kent Moore transmission fixture holder.
Got the vise & holding fixture installed.....
The '69 Chevelle caught my eye... Wow!Got the vise & holding fixture installed.....
In my recent saga with Subaru motor mounts -- at least with CVT units where the motor mounts actually attach to the bellhousing -- I found myself really wishing for 17mm in 1/4" dr
Tekton offers 'em -- albeit in impact only -- so I ordered a 16 and 17. My chromes already go to 15 in 1/4"
Also, more "shop supplies" than "tools": random assortment of torsion springs
Tekton offers 'em -- albeit in impact only -- so I ordered a 16 and 17. My chromes already go to 15 in 1/4"
Also, more "shop supplies" than "tools": random assortment of torsion springs
I've always wanted a spool gun and what I really want is one for my Lincoln 256, but they're spendy.
I also have a Hobart 210MVP and stumbled on this today at TSC. Even though it was priced at clearance of $175 I knew it would come up at $125 after a quick web search. So, $125 for a $300 spool gun....I couldn't say no
I also have a Hobart 210MVP and stumbled on this today at TSC. Even though it was priced at clearance of $175 I knew it would come up at $125 after a quick web search. So, $125 for a $300 spool gun....I couldn't say no
Last edited:
I have one of those tables at work. They are built sturdy. The price on Grainger didn't used to be too bad. I am betting it has gone up now.Got the vise & holding fixture installed.....
Been thinking about pulling the trigger on the similar Quinn set at Harbor freight.
this is a very nice set if you have an Amazon account and these are less $ than the harbor freight pull and shoot. but if you're a heavy tool user maybe the hf lifetime warranty is the better deal.
I got a similar set from Northern Tools 10+ years ago that I have beat the piss out of them doing plenty of suspension mods on Jeeps and yet to break one. Weekend home garage stuff duty cycle of course, but I cannot justify the cost for tool truck brand impact sets.
I pissed off the old tool truck vendors at my old job I would tell the vendor you're like my ex only comes around on pay day. I heard there's a name for those trucks (R**e wagon)
For only $111 don't mind if I do:
My house had a click together floating floor in the basement bathroom. I've never liked it and knew I would have to pull it up and tile the floor. Last weekend I decided it was time. Picked up this Ridgid water saw. Works great.
