Motor-craft filter for ram 5.7 Hemi ?

[Plawan]

Which Motor-craft oil filter will fit my Ram 1500 classic 5.7? I’d like to use a base end bypass valve if possible.
Thanks
Shawn

 

[ZeeOSix]

Go to RockAuto, put in your vehicle and see what filters pop-up. Once we know some of the filters that engine takes, then someone will know which Motorcraft will fit, if there is one.

https://www.rockauto.com/

 

[OVERKILL]

Which Motor-craft oil filter will fit my Ram 1500 classic 5.7? I’d like to use a base end bypass valve if possible.
Thanks
Shawn

FL-820S. It will be a bit snug, as it's the same as the larger 6.4L/6.2L filter (original RAM 5.7L filter before the downsize) but it usually fits.

 

[Plawan]

FL-820S. It will be a bit snug, as it's the same as the larger 6.4L/6.2L filter (original RAM 5.7L filter before the downsize) but it usually fits.

Great thank you

 

[OVERKILL]

Great thank you

You are quite welcome. I'm running the AMSOIL equivalent on the RAM in my signature, and the FRAM Ultra equivalent, the XG2, on my SRT.

 

[ZeeOSix]

Does the FL-820S (tearolator) still have a base end bypass? Not all Motorcraft filters have one.

 

[OVERKILL]

Does the FL-820S (tearolator) still have a base end bypass? Not all Motorcraft filters have one.

Did the last time I checked. It was the original filter that was being pimped as having it, LOL, because it was the Modular filter.

 

[4WD]

What about XG10575 ? I have a couple with the lower bypass and wonder if they are ok for a 5.7L

 

[53' Stude]

What about XG10575 ? I have a couple with the lower bypass and wonder if they are ok for a 5.7L

According to parts catalog a PH 48 or PH 820 are the two correct filter options for a 5.7 HEMI

 

[flash7210]

Motorcraft FL-500S will fit. It's the same diameter as the PF48 / ph10060 but is taller.
The XG10575 is the same size as the FL-500s

 

[OLEJOE]

The Mopar MO-899 also has the base end bypass but has a nitrile ADBV. That’s if you can use the bigger filter.

 

[DibroTeam]

I have 5.7 hemi and use Motorcraft FL500s.

 

[KCJeep]

If the 500 will fit it would be a better pick. The 820’s have largely been a poster child for “blech!” on here.