I know, I know, I said I wasn't going to ask any more questions. I tried to install the M-30 yesterday. Installed the M-30, put on the sandwich adapter, cut the hoses to length, everything was ready to go except the oil filter. Went and bought the PH43 since I knew I didn't have much clearence. I could not install the filter because the control arm was in the way. I have a 2002 S-10, and as I said there is not much room where the oil filter goes. Is there a smaller filter that will attach to the sandwich adapter? I have some time, so there is no rush. I had to take everything apart and put it back to stock and as I went to put the front tire back on, the truck fell off the jack and broke one of my fingers. It will probably be two or more weeks before I can try the install again. Thanks for any advise.
Install
- Thread starter gmayer5454375
- Start date
- Status
- Joined
- Sep 28, 2002
- Messages
- 39,799
The PH43 shows this in a WIX
51068
UPC Number: 765809510685
Principal Application: Chrysler (70-91), Ford/Mercury (83-97), Land Rover (95-04), Toyota (68-90)
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.338
Outer Diameter Top: 3.660
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.834 2.462 0.200
and this in a Baldwin
PART NUMBER: B233
Descriptions : Microlite Full-Flow Lube Spin-on
Contains : Anti-Drainback Valve
8 PSI By-Pass Valve
Fits : Chrysler, Ford, Toyota, Volkswagen Automotive, Light-Duty Trucks, Vans; Agco, Bobcat, Ford, New Holland Equipment
Replaces : Chrysler 3549957; Ford C5ZZ-6731-A
Thread : 3/4-16
O.D. : 3 3/4 (95.3)
Length : 4 11/32 (110.3)
I.Gskt : G381-A
Related to : B2 (Long Version)
B34, B132 (Short Versions)
If this is truly the case (and you have the threaded adapter that allows the use of a Ford filter on your S10) then you can use...
PF-53 AC LF3335 Fleetguard L10241 Purolator PH3614 Fram ST3614 WallMart
51348 WIX 1348 NAPA 51335 WIX 1335 NAPA
There are others that should work ..but that should be enough for you to get it working.
51068
UPC Number: 765809510685
Principal Application: Chrysler (70-91), Ford/Mercury (83-97), Land Rover (95-04), Toyota (68-90)
All Applications
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.338
Outer Diameter Top: 3.660
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.834 2.462 0.200
and this in a Baldwin
PART NUMBER: B233
Descriptions : Microlite Full-Flow Lube Spin-on
Contains : Anti-Drainback Valve
8 PSI By-Pass Valve
Fits : Chrysler, Ford, Toyota, Volkswagen Automotive, Light-Duty Trucks, Vans; Agco, Bobcat, Ford, New Holland Equipment
Replaces : Chrysler 3549957; Ford C5ZZ-6731-A
Thread : 3/4-16
O.D. : 3 3/4 (95.3)
Length : 4 11/32 (110.3)
I.Gskt : G381-A
Related to : B2 (Long Version)
B34, B132 (Short Versions)
If this is truly the case (and you have the threaded adapter that allows the use of a Ford filter on your S10) then you can use...
PF-53 AC LF3335 Fleetguard L10241 Purolator PH3614 Fram ST3614 WallMart
51348 WIX 1348 NAPA 51335 WIX 1335 NAPA
There are others that should work ..but that should be enough for you to get it working.
Gary Allen, you are the man. I bought and installed the Super tech 3615 filter and everything fits great. You the Man. Just took the truck for a test drive and to check for leaks. Now I need to see how much more oil to add for the extended hoses. Once again thanks.
You can try the smallest Toyota filter you can find. It is hard to read without removing it but I think I have a PH 2951 on my Chevy four cylinder.
Toyota's are all 3/4"-16 threads.
Ralph
Toyota's are all 3/4"-16 threads.
Ralph
- Status
