After extended periods of my '19 F250 sitting between starts I have some lifter noise upon start-up. Lasts about 2-3 seconds max. I am looking for a solution that will allow the starter to crank until oil pressure builds before ignition and/or fuel circuits energize without triggering a code. Accusump is a packaging and budget solution that is not appealing to me. Thoughts? Solutions?
FORD 6.2 crank without start
- Thread starter Daryl D
- Start date
Ford Flood Mode to prevent dry starts post oil change
I've never heard of this before and tried it on my work truck, 18 F150, and it works...
www.fordtremor.com
Fantastic Danno! Just confirmed that works a charm. I figured there had to be some way for mechanics to crank without start not needing to pull fuses or relays. Search all over Ford Truck Enthusiast sites to no avail. 1st post here and 20 minutes later....
It should have clear flood mode - hold the pedal to the floor and hit the starter and let it do it's thing for a few seconds to pump oil around.
Similar threads
- Locked
