TGMO 0w20 with 1200 miles on oil and 21000 miles on car. Car was always serviced at Dealer.Documented. Had 2 oil changes, supposedly with 0w20 Full Syn TGMO. 10000 mile OCI.Yeah Right!
I drained what was in the motor when purchased and sent off for analyses because I don't trust dealers and that's why I asked if Blackstone could tell me if it had Full Syn in motor. I will send another sample after 5k on the oil in there now which is Castrol Edge w\Titainium 5w20.
CHRIS: We aren't sure if this Camry was equipped with the 4-cylinder or the 6-cylinder. We put up
averages for the I-4, but if that's wrong, let us know. They show typical wear after about 6,000 miles on the
oil, so with only 1,200 miles on this oil, copper shows some wear at brass and bronze parts. We don't have
the ability to test the base stock, which would be required to determine if this is synthetic oil or not. If you
send in a virgin sample of the synthetic oil, we can compare the additive packages and see if they're similar.
Check back to monitor COPPER.
First number is actual sample. Second number is average for motor
Toyota 0W/20
0 qts BETWEEN CHANGES
12/27/2013
Toyota 2.5L 4-cyl (2AR-FE) VVT-i
1,200 Miles ON OIL
OIL
REPORT
ALUMINUM-4 3
CHROMIUM-0 0
IRON -5 7
COPPER -6 2
LEAD -0 1
TIN -0 1
MOLY -106 74
NICKEL -0 0
SILVER -0 0
TITANIUM-0 2
POTASSIUM3 1
BORON -3 31
SILICON -18 16
SODIUM -3 47
CALCIUM -2067 1979
MAGNESIUM12 221
PHOSPHORS688 679
ZINC -763 783
BARIUM -0 0
SUS Viscosity @ 210F - 48.2 46-57
cSI Viscosity @ 100C - 6.73 6.0-9.7
Flashpoint in F - 415 >385
I drained what was in the motor when purchased and sent off for analyses because I don't trust dealers and that's why I asked if Blackstone could tell me if it had Full Syn in motor. I will send another sample after 5k on the oil in there now which is Castrol Edge w\Titainium 5w20.
CHRIS: We aren't sure if this Camry was equipped with the 4-cylinder or the 6-cylinder. We put up
averages for the I-4, but if that's wrong, let us know. They show typical wear after about 6,000 miles on the
oil, so with only 1,200 miles on this oil, copper shows some wear at brass and bronze parts. We don't have
the ability to test the base stock, which would be required to determine if this is synthetic oil or not. If you
send in a virgin sample of the synthetic oil, we can compare the additive packages and see if they're similar.
Check back to monitor COPPER.
First number is actual sample. Second number is average for motor
Toyota 0W/20
0 qts BETWEEN CHANGES
12/27/2013
Toyota 2.5L 4-cyl (2AR-FE) VVT-i
1,200 Miles ON OIL
OIL
REPORT
ALUMINUM-4 3
CHROMIUM-0 0
IRON -5 7
COPPER -6 2
LEAD -0 1
TIN -0 1
MOLY -106 74
NICKEL -0 0
SILVER -0 0
TITANIUM-0 2
POTASSIUM3 1
BORON -3 31
SILICON -18 16
SODIUM -3 47
CALCIUM -2067 1979
MAGNESIUM12 221
PHOSPHORS688 679
ZINC -763 783
BARIUM -0 0
SUS Viscosity @ 210F - 48.2 46-57
cSI Viscosity @ 100C - 6.73 6.0-9.7
Flashpoint in F - 415 >385