- Joined
- Mar 27, 2021
- Messages
- 11
Hello, new to the forum, need assistance / advice.
I mistakenly decided to try Motorkote Hyper Lubricant in my engine (5.7 Hemi V8) yesterday, I added 14ozs of it to 6.5qts of fresh 5w20 Pennzoil conventional oil.
After reading a little bit online I learned that Motorkote contains Chlorinated Parrafins which eventually can corrode and subsequently damage internal parts of the engine whenever
they come into contact with moisture long enough. (The lubricate reacts with moisture and forms hydrochloric acid)
I decided to drop the the oil and filter again today after less than a day of having it in my engine (~15 miles of driving) due to concerns of causing irreversible wear. I didn’t notice anything strange with the oil that drained out.
Is there anything else I should do in order to make sure I flush all of it out like change the oil again in a week and / or use some sort of product or flush to neutralize it or is the damage already done?
Thank you!
Mike
I mistakenly decided to try Motorkote Hyper Lubricant in my engine (5.7 Hemi V8) yesterday, I added 14ozs of it to 6.5qts of fresh 5w20 Pennzoil conventional oil.
After reading a little bit online I learned that Motorkote contains Chlorinated Parrafins which eventually can corrode and subsequently damage internal parts of the engine whenever
they come into contact with moisture long enough. (The lubricate reacts with moisture and forms hydrochloric acid)
I decided to drop the the oil and filter again today after less than a day of having it in my engine (~15 miles of driving) due to concerns of causing irreversible wear. I didn’t notice anything strange with the oil that drained out.
Is there anything else I should do in order to make sure I flush all of it out like change the oil again in a week and / or use some sort of product or flush to neutralize it or is the damage already done?
Thank you!
Mike