Started staining the wood today. I sanded off any marks and printing on the wood, you cant tell where they were once the stain goes on. I was worried, because the wood looks much lighter once sanded
I don't think I posted this anywhere yet, but I found the BEST electrical boxes. These are deep enough to be closed while in use (Assuming the cord is not too thick) but is still almost completely flush with the outside. $50 a pop so not cheap. I am going with a 20a outlet with the tabs broken, top outlet on L1 and bottom on L2, and then an L14-30R on a 30a outlet
I will have 3 of these boxes around the shed. They will share a single 30a outlet, and 2 x 20a breakers
Covers don't seem to exist for this config, so I had to get creative. Don't worry, I have some stainless screws on the way too