Search results

  1. P

    5w30 full synthetic vs 10w30 full synthetic

    I am a 10/30 fan. The only move away from a 10/30 is if I use PP Euro L 5/30.
  2. P

    What made you buy a new lawn mower?

    I had a second place with acreage. At both places I had old push lawn mowers for trimming. When I sold house #1 I decided it was time to get rid of the old push mowers and just get a super recycler. It was self propelled and lighter then what I was using before. I has a lot of getting from...
  3. P

    post your latest transmission lubricant change.

    2019 Nissan Frontier Desert Runner Out factory fill , 52,320 miles In MaxLife 3 quarts, 26 ounces Oil was just off color some but good other wise. Did drain plug. Will try again but vacuum to see how much comes from the top in about 500 miles or so.
  4. P

    Homemade lube/protective Black Powder shooters

    I am a warm, not hot, water with dawn as the first go around then a good water rinse follow up with a good drying. All threads get a light grease and internals get Ballistol. Bore is either Ballistol or TC bore butter. External same as the bore.. I do have a cannon and it is done a lot...
  5. P

    Homemade lube/protective Black Powder shooters

    Like the title says what is your homebrew. I looking more for what you actually use on the gun, not the bullet lube. Thanks
  6. P

    Fram ultra only at Walmart?

    I went to the fram site to look up an air filter for a 2019 frontier 4.0. The XGA 7440 shows up as an ultra and only at Walmart. I find it hard to believe only the fram ultra air filter can be bought at Walmart. Is it a regular filter with just the ultra name? I got it anyway.
  7. P

    Post your latest oil change

    2019 Nissan Frontier 4.0 , 50k mile mark, 7k on oil, 14k on filter Out PP 5/30 Euro L, M1 110A In QSFS 10/30, M1 110A I think I will stick with the QSFS 10/30 because it cheap enough and easy to get at Walmart. No PP 10/30 or Havaline 10/30 FS on the shelves. Super tech not good on price point.
  8. P

    Quaker State Synthetic

    QSFS is the new oil of choice for me for my truck and some of my lawn equipment. 10/30 is the flavor I like.
  9. P

    Have you noticed a weight difference??

    Maybe not. Is he comparing the same weights? Density of 0/20 is .838 while a 5/30 is .84. in PP. Maybe I need to look up the density of all oils to prove if one oil weighs more than the other. I know my body is sensitive enough to know the difference.
  10. P

    Have you noticed a weight difference??

    So does a jug of PP 5/30 weigh more than a jug of PP 0/20? I need to go look at the spec sheet to see the density of each.
  11. P

    2019 Frontier ATF matic S

    45.000 miles on truck. I will use ML and drain/fill 3 times in a week. then 1 drain every 15 to 20k miles.
  12. P

    2019 Frontier ATF matic S

    I am looking to do an ATF change. The engine bay says to use a matic -S fluid. Looks like about the only fluid in a gallon size with a "recommend" matic-S is Maxlife, I prefer not to use a high mileage fluid. I would like to use Castrol Transmax Full synthetic multi vehicle but can't find it...
  13. P

    Stand by generator fixed one problem then...

    Ordered a thermal switch that generic uses. They have the ratings listed. I notice the RVs generators call for a 305f switch, I thinking a 285f switch so I ordered a 295f switch. I guess I will find out next summer in hurricane season. Price was $16 shipped.
  14. P

    Standby generator capacitors

    I had a fluke 11 that did check capacitors. Just make sure you have a multi meter that has enough range for motor capacitors. Some of the meters are just enough range for electronic capacitors. I need to get another one.
  15. P

    Stand by generator fixed one problem then...

    The wires to this switch does not look to be Teflon coated wires so I do have a hard time thinks it could run up to 285 f but who knows. I can now justify a non contact temperature gun:)
  16. P

    Stand by generator fixed one problem then...

    My old eyes did get the info off . Maker is Airpax 5003 with the numbers C53285B0835. I looked it up and had no direct hits but I did come across a sheet to intrepid the numbers. My wildest guess is a 285 f switch. I am only guessing because the temperature trip point is suppose to be in the...
  17. P

    Stand by generator fixed one problem then...

    I posted about the capacitors for a B&S 12kw standby gen. I changed them out and the voltage readings are correct now. Before it was shutting down in 3 seconds now it shuts down in about 10 seconds, But this time it gave me a code high oil temperature. I tried again same results. I touched the...
  18. P

    Post your latest small engine oil change

    Echo 4000 inverter gen with chinese 212 cc engine. 5 hour change out out Factory fill came out glittery. in M1 HM 10/30 Will change again after 10 more hours.
  19. P

    Post your latest small engine oil change

    Gravely Pro Turn 148 with Kaw FX691V yearly change Out Delo 15/40, MC 910S In Delo 15/40, MP 3614 Walmart did not have a MC 910S in stock so I wanted a ST 3614 but not in stock. Had to settle for the MP 3614.
  20. P

    Post your latest oil change

    2019 Nissan frontier 4.0 V6. 43,290 miles 7,000 miles on oil out PP Euro L 5/30 in PP Euro L 5/30 Left M1 filter on for one more oil change
Back
Top