I posted about the capacitors for a B&S 12kw standby gen. I changed them out and the voltage readings are correct now.
Before it was shutting down in 3 seconds now it shuts down in about 10 seconds, But this time it gave me a code high oil temperature.
I tried again same results. I touched the sensor and no way it was anywhere near hot just running a few seconds. I removed one of the two wires and started it
up. I ran it for 15 minutes. Shut it down and removed switch No biggie I thought until I saw the price of the part 186205gs .....$70!!!!. It is only a $7 part. I am going to go after market if I can get the specs on the B&S part. Any one knows what temperature these things trip at?
Before it was shutting down in 3 seconds now it shuts down in about 10 seconds, But this time it gave me a code high oil temperature.
I tried again same results. I touched the sensor and no way it was anywhere near hot just running a few seconds. I removed one of the two wires and started it
up. I ran it for 15 minutes. Shut it down and removed switch No biggie I thought until I saw the price of the part 186205gs .....$70!!!!. It is only a $7 part. I am going to go after market if I can get the specs on the B&S part. Any one knows what temperature these things trip at?