OVERKILL
$100 Site Donor 2021
Originally Posted By: rjundi
I noticed on my "high end" router (Cisco E3000) I was getting slow downs. I have a 25Mbps download(comcast). After a few days using xfinity's own speedtest I would only get 3Mpbs wireless or through 1Gbit ethernet throught my router. I isolated it to my router not the cable modem.
I googled and found out something in advanced settings called Pnp should be off and MTU from Auto set manually to 1350. Its been fine for weeks now holding steady.
If you are paying for 50Mpbs you need a current router but beyond that make sure to google it and see if known issues.
Looked into this some more. Yes, it is a bug in the firmware related to uPnP as indicated here:
http://homecommunity.cisco.com/t5/Wirele...oot/td-p/330920
So it had nothing to do with your MTU (though I see it suggested earlier in the thread, likely the same suggestion you read). On page 5 you'll see that a guy tested the "MTU fix" and noticed the same speed problem, then did the uPnP "fix" and the speed problem went away.
Supposedly, they've released an updated firmware that has fixed the issue. So that would be my first stop.
The device is also supported by DD-WRT, so if the Linksys/Cisco firmware update doesn't fix it, that will. LOL!
I noticed on my "high end" router (Cisco E3000) I was getting slow downs. I have a 25Mbps download(comcast). After a few days using xfinity's own speedtest I would only get 3Mpbs wireless or through 1Gbit ethernet throught my router. I isolated it to my router not the cable modem.
I googled and found out something in advanced settings called Pnp should be off and MTU from Auto set manually to 1350. Its been fine for weeks now holding steady.
If you are paying for 50Mpbs you need a current router but beyond that make sure to google it and see if known issues.
Looked into this some more. Yes, it is a bug in the firmware related to uPnP as indicated here:
http://homecommunity.cisco.com/t5/Wirele...oot/td-p/330920
So it had nothing to do with your MTU (though I see it suggested earlier in the thread, likely the same suggestion you read). On page 5 you'll see that a guy tested the "MTU fix" and noticed the same speed problem, then did the uPnP "fix" and the speed problem went away.
Supposedly, they've released an updated firmware that has fixed the issue. So that would be my first stop.
The device is also supported by DD-WRT, so if the Linksys/Cisco firmware update doesn't fix it, that will. LOL!