which SP rated 10w-30 has highest level of moly?
- Thread starter kmrinpa
- Start date
Carlostrece
$100 Site Donor 2025
I don't know which is highest, but I do know that Valvoline EP FS has high moly and it's a type of moly that's very good. NAPA FS same. In fact, I think NAPA FS is Valvoline EP FS in a NAPA bottle.
There are probably other high moly oils, but those are the 2 that I know of.
There are probably other high moly oils, but those are the 2 that I know of.
I don't know about moly, but I'd be using this one:
https://www.ravenol.de/en/product/motorenoel/4-takt-motorenoel/ravenol-scooter-4-t-10w-30
https://www.ravenol.de/en/product/motorenoel/4-takt-motorenoel/ravenol-scooter-4-t-10w-30
can't get to the product page from that table?
Why does it have to be API SP?
Redline HP 10w30, although you could probably use their 5w30 its that on the thick side.
wemay
Site Donor 2023
Unfortunately, the last posted tests on PQIA are from March 2023. Formulations have changed since. Of the majors, I would assume Valvoline has the most moly. This assumption is made because their other oils, not 10W30, have significant amounts based on recent VOA which can be found on this site.
Last edited:
I ran Redline 20w50 MC oil and the UOA showed a very high moly content (290 ppm in UOA against a 500 ppm spec at the time) however they have lowered it considerably in the past few years to 150 ppm in their MC oil literature in all those oils. However, their passenger car oils have continue to have high moly as was shared above.
Higher moly content has become a popular thing that folks are looking for in their oil choice. What is the main advantage (if any, is it six of one/half dozen of the other?) folks are getting of moly over boron in a motor oil, as boron seems to be at least as good or better with respect to friction/wear reduction.
Higher moly content has become a popular thing that folks are looking for in their oil choice. What is the main advantage (if any, is it six of one/half dozen of the other?) folks are getting of moly over boron in a motor oil, as boron seems to be at least as good or better with respect to friction/wear reduction.
1) air cooled small engines without oil filters get more frequent premature oil changes to get the crap out...
2) what is the current standard for 10w-30 pcmo? (which is the most readily available category of 10w-30 oil)...api sp
Sure but why is it relevant and required in this application? It’s not. I’d go with some of the recommendations in this thread and disregard the API license.
You are approaching this the wrong way.
This is like shopping for ice cream based on the amount of carrageenan in it because you heard it makes ice cream creamier.
Pick an oil on its performance, not its content.
Carlostrece
$100 Site Donor 2025
You asked a valid question. However, aren't certifications your mantra? It seems odd that you'd be the one questioning why he wants a certified oil. No offense intended.
Patman
Staff member
The current standard is now SQ although it has been slow to appear on shelves so far
I use the search for a specific brand.
Similar threads
