SupplyHouse.com is where I buy all of my HVAC parts if they are not available from Amazon.Mine just died 15f tonight and no heat.. brrr.
Need a new draft inducer (blower motor assembly)
part 333710-751
Leaking what???said blower motor leaking too.. not included in that price
blower motor >oil on bottom of furnace.. I'm not worried about that.. I can replace it if it goes.Indoor blower motors are very robust..... one of the least changed parts in a unit.
SupplyHouse.com is where I buy all of my HVAC parts if they are not available from Amazon.
CARRIER Draft Induction Motor
Personally, I would roll the dice on an aftermarket part (since it is just the draft induction motor) at half the OEM price via Amazon Prime.
CLIMATEK Draft Induction Motor
Isn't CLIMATEK is free shipping and returns on Amazon Prime?blower motor >oil on bottom of furnace.. I'm not worried about that.. I can replace it if it goes.
Supplyhouse is friday delivery 400$ << probably going with this.. thank you.
climatek is from northamericanhvac that has a 50% restocking fee and likes to send out wrong parts.. at least from their 1.7 star rating online.
everywhere is sunday or later.
Isn't CLIMATEK is free shipping and returns on Amazon Prime?
SupplyHouse was supposed to be free shipping. Was the extra cost for expedited shipping?
PM me if you want to chat privately about your HVAC scenario.
Living in Minnesota, I always stock an inducer blower/ roll out sensor, pressure and igniter after 3 years of a new furnace. Because Murphy's law will have one of those go down on a Saturday night on a 15 to 20 negitive deg night.Mine just died 15f tonight and no heat.. brrr.
Need a new draft inducer (blower motor assembly)
part 333710-751
View attachment 253773
Oh and we have 8 cheap 1,500 watt and 500 watt ceramic electric heaters to keep the areas where the piping is ran. Outlets are marked for her to place each heater so the wiring and amp load are safe for her. I myself did the full cooper re-plumband all new drain/vent/stack PVC. Also did the full pole to new panel and every switch and outlet as it WAS a 1940 knob and tube redo. ALL the work was permitted and passed to the shugrin of the wife (money and hassle/time). But it is safe. ( all the inspectors commented on the industrial overkill on each of the trades I did on every aspect of the house ). It took her not being in the house and 1 year and one, month to do ( still have1.5 2 months left of that window till she is in.)Living in Minnesota, I always stock an inducer blower/ roll out sensor, pressure and igniter after 3 years of a new furnace. Because Murphy's law will have one of those go down on a Saturday night on a 15 to 20 negitive deg night.
I just Installed a ACiQ furnace and ACiQ inverter AC unit ( Carrier discount brand ) in my daughter's 1884 un-insulated farm house on St Paul, I will be pushing those for her to get in 3 years too. If she goes down because of a bad part/ or power outage, with how that house looses heat, she only has about 2 hour to 3 hours till the pipes freeze at those temps.I also have a 1,900/2,500 inverter generator that was just bought in a power outage scenario and she will be getting insulation once we can find someone here who has the new Mineral wool chopper/blowers that are coming out, as I want her to get mineral wool and not celulous fill. I have 2 different warning temp sensorsystems to warn us of a temp drop. Router/Modem has a 3 hour battery backup on them to insure we have a good chance of getting the warning.
Have to work all day.where in ne ohio are you. Any interest in driving to erie pa?
if so please reply and also pm me.
Does that one have the hall effect sensor built into it?Furnace guy wants 1100 ouch said blower motor leaking too.. not included in that price
the draft inducer motor is locked up, Can spin it 1/2 turn at a time with screwdriverDoes that one have the hall effect sensor built into it?
I have a carrier and had a problem a few years ago where the motor would run for a couple seconds then cut off, still ended up having to replace the whole thing because mine has the hall effect(speed sensor) built into it. Luckily I have 2 zone heat so I could wait for the part to come.