What to use for a dispenser bottle? LC20 and FP60?

Status
Not open for further replies.
Joined
May 21, 2005
Messages
415
Location
Augusta Ga
I forgot to order the dispenser bottle when I bought my gallon of FP60. What should I use to measure out the doses of FP60? Any Ideas?
 
I think I am going to use my empty bottle of Lucas UCL to put the FP60 in the tank. I'll just measure out the 2 oz and put it in the bottle....

any harm with the FP60 mixing with the little bit of Lucas left in there? (btw after 3 treatments of the Lucas my MPG has gone up by maybe 1 1/2 to 2 mpg
smile.gif



Goose
patriot.gif
 
Boaz:
I have used my old 5.2 oz and 32 .oz bottles of Lucas.

I just pour the FP60 into the 32.oz bottle with a small funnel, then when i need the 5oz for my 25gal fuel tank.

I just squirt it into the 5.2.oz bottle...
then pour it into the tank.

Plus it's easier to shake the 32oz. bottle.

Hope that helps.
 
I use there "Measuring bottle 16 oz" and a long funnel. Works perfect for me.

So far, I am happy with FP60. Maybe it is me, but it does idle smoother.
 
Like Ugly, I too use a Sta-bil two-chamber, measuring bottle. It's absolutely perfect for the task. There are even two sizes to choose from; pick the one that fits your needs.
cheers.gif
 
A shot glass. Fill it up five times and toss the stuff in your tank - you're now good for 25 gallons of gas. Just don't loose track of what you are doing!!!
 
I went out and bought the 5.25oz lucas UCL bottle just for use as dispensing FP. $4 measuring bottle! I hated having to use a funnel for the FP.
Lucas advertizes specifically that UCL will increase mileage, if it does better than FP it would be a good deal as a gallon is around $25. Although I don't think I see an increase with either FP, UCL, or techron/acetone/etc on my car. At least the fuel injectors are clean as **** now.
 
Thanks for the advice folks. Tonight at Advance auto I found a small Sta-Bil bottle that holds exactly 4oz. It will work perfectly!
 
Status
Not open for further replies.
Back
Top Bottom