I had purchased several M113A filters for my 2015 Corvette when they were being made by Champion Labs. Since the catalogue on the Mobil1 website specifies the M113A filter for my car that requires a 22 psi bypass pressure but also specifies the M113A for cars that require a 15 psi bypass pressure I was concerned about the bypass pressure being correct and contacted Mobil1 technical support. Champion Labs responded that the M113A is correct for my car and has a 22 psi bypass pressure.
I now have a 2020 Corvette which also requires a 22 psi bypass pressure and I have several M113A filters made by Champion Labs. Mann+Hummel is now the supplier of Mobil1 filters. A poster on the Corvette forum had contacted Mobil1 technical support inquiring about the bypass pressure of the M113A filter. He was told the M113A bypass pressure is too low and he should use a M114A filter which isn't yet on Mobil1's website (but it is available at Advance Auto). The website still shows the M113A as the correct application for a 2020 Corvette. I contacted Mobil1 technical support and was told the same thing by the M+H support. They said I need to contact Champion Labs for questions about the M113As made by Champion Labs.
Does anyone know the true bypass pressure of the M113A made by Champion Labs?
I now have a 2020 Corvette which also requires a 22 psi bypass pressure and I have several M113A filters made by Champion Labs. Mann+Hummel is now the supplier of Mobil1 filters. A poster on the Corvette forum had contacted Mobil1 technical support inquiring about the bypass pressure of the M113A filter. He was told the M113A bypass pressure is too low and he should use a M114A filter which isn't yet on Mobil1's website (but it is available at Advance Auto). The website still shows the M113A as the correct application for a 2020 Corvette. I contacted Mobil1 technical support and was told the same thing by the M+H support. They said I need to contact Champion Labs for questions about the M113As made by Champion Labs.
Does anyone know the true bypass pressure of the M113A made by Champion Labs?