Tokyo Roki PE01-14-302B
July 13, 2019
Miles: 5340
Time in service: 11 weeks
Factory Fill 0W20
Photo #1 Exterior view
Photo #2 Overview
Photo #3 Base plate exterior
Photo #4 Base plate interior
Photo #5 Filter thread end
Photo #6 Filter dome end - Bypass valve
Photo #7 Media at the clipped seam.
Photo #8 Media opposite the seam
The filter removal tool did some damage to the can. I was able to finesse the filter out without damaging it. Kudos to the Mazda mechanic for minimal damage.
Build quality of this part is excellent. Pleats were nicely spaced, potting glue minimal, no ADBV and the bypass valve is an interesting design.
I had to move the roller bearings on the filter cutter to cut it open.
Overall, I'm impressed with the filter even though it is very small.
Enjoy the pics!!!
July 13, 2019
Miles: 5340
Time in service: 11 weeks
Factory Fill 0W20
Photo #1 Exterior view
Photo #2 Overview
Photo #3 Base plate exterior
Photo #4 Base plate interior
Photo #5 Filter thread end
Photo #6 Filter dome end - Bypass valve
Photo #7 Media at the clipped seam.
Photo #8 Media opposite the seam
The filter removal tool did some damage to the can. I was able to finesse the filter out without damaging it. Kudos to the Mazda mechanic for minimal damage.
Build quality of this part is excellent. Pleats were nicely spaced, potting glue minimal, no ADBV and the bypass valve is an interesting design.
I had to move the roller bearings on the filter cutter to cut it open.
Overall, I'm impressed with the filter even though it is very small.
Enjoy the pics!!!