Schaeffer's 132 Moly EP

[USAFREOD]

Just got my used oil analysis back for a nearly ancient air-cooled motor with a bit of blow-by and burns some oil.

Tried Schaeffer's 132 at the last oil change. Ran it for 32 hours.

Moly was only 2!!! How much should I see? I know I lost some from blow-by, but shouldn't the number be considerably higher. My Zinc number went way up.

Looks like the Moly is getting used up by the motor.

 

[MolaKule]

Search on Moly or 132 such as:

http://theoildrop.server101.com/cgi/ultimatebb.cgi?ubb=get_topic;f=11;t=000187

http://theoildrop.server101.com/cgi/ultimatebb.cgi?ubb=get_topic;f=1;t=002315

http://theoildrop.server101.com/cgi/ultimatebb.cgi?ubb=get_topic;f=1;t=000933

[ July 15, 2004, 03:08 PM: Message edited by: MolaKule ]

 

[USAFREOD]

Thanks Mola!

But my Moly numbers still dropped from the mid twenties to 2!!!

It either went out the breather, or used up I guess...

 

[Motorbike]

What is the oil capacity of the small engine and how much 132 was used ?

Also , what engine oil was used during the previous interval and this one and can you post the analysis ?

 

[Motorbike]

The VOA I had ran showed a zinc value of 6 in the 132 .
When you spoke that your zinc went way up were you saying it was due to using the 132 or a different engine oil ?

Again if you will , please post analysis's and the two oils used along with capacity of the engine and amount of 132 used in it for starters.

Thanks

 

[MolaKule]

The moly was either used in "uptake" to parts or you diluted it.