Post your latest oil change

1998 Chevrolet S10 4.3L
205,050 miles

Out: M1 HM 10W30, QS 3980
In: Same

OCI: 5,018 miles,
 

Attachments

  • 205K oil change 001.webp
    205K oil change 001.webp
    128.9 KB · Views: 36
'18 subie Impreza...@ 17,850 miles

unfortunately overpaid a local Valvoline Instant Oil Change after a groupon code was rejected for a full synthetic oil change & tire rotation! got 0w-20 full syn oil & one of the valvoline oil filters (forgot to bring one of my subie filters)...replaced the valvoline filter within 100 miles with a subie filter*

* told I had to use subie oil filters to keep my certified powertrain warranty in effect
 
Rotella our cost is $20~ gallon from Autozone. Least filter was under $3.00🙊🙊🤣
 

Attachments

  • 516CBEC2-38B3-4E73-A19B-EF398EF03109.webp
    516CBEC2-38B3-4E73-A19B-EF398EF03109.webp
    176.6 KB · Views: 35
  • 42692CD2-10E7-47FB-8592-561266931F41.webp
    42692CD2-10E7-47FB-8592-561266931F41.webp
    157.1 KB · Views: 34
2014 4runner 139k
out mobil 1 0w20 ep
In 5w30 Schaffers 9000
Kept fram tg on, going another 10k oci for total of 20k on the tg on a clean engine

2005 tacoma 225k
Out 10w30 valvoline maxlife fs fram ultra that was on 10k
In same oil purolator boss
 
1985 Mazda RX-7 12A 1.1L Rotary, unknown engine miles, around 15k miles since rebuilt engine installed in 2002.
OCI: 274 miles, 9 months
Changed the oil early for mileage because the carburetor had flooded the engine several times, a new needle and seat fixed the issue.

Out: 4.3 quarts Castrol GTX 20W-50 (Wasn't in stock this time around), Mazda B6Y1-14-302A filter
In: 4.9 quarts Super Tech 20W-50 conventional, Super Tech MP9688 filter and a new secondary Napa Gold fuel filter to help keep junk out of the carb.

52219676305_b429b80135_c.jpg
 
Last edited:
2010 Ford Crown Victoria 4.6 V8 116,836 miles

Out: 5qts Valvoline PBE 5w40 & 1 qt HPL EC with a Fram filter, 5000 mile OCI

In: 6qts of HPL 15w40 CK4 and a Fram filter
How did the cleaner work for you? Did you take a peek under the valve covers before and after? Any indications that your engine derived benefit from the product? Thanks!
 
How did the cleaner work for you? Did you take a peek under the valve covers before and after? Any indications that your engine derived benefit from the product? Thanks!
So a couple of things I did notice through the fill port I had some mahogany looking varnish on all the parts and that did appear to lighten in color but what was impressive was that when I drained the oil it looked like a very dark melted chocolate mixed with a very deep mahogany color. I’ve never seen an oil come out like that and nothing like that on this car. So did it work? maybe, like I said it appeared to lighten the varnish they was built up on stuff I could actively see we shall see what continued use of HPL oils do since from my understanding they actually will clean as well I hope to have a spotless engine internal when I go to do new timing chains in the next year or so.
 
Back
Top Bottom