Drained out all Coolant from 2002 Honda Accord V6 3.0.
1) Unscrewed the bottom drain bolt...
2) Removed the bottom Radiator Hose.
3) Ran this through system to make sure all old coolant was out ( Freezetone )
Its basically Water
Antifreeze Type Compatibility: all brands
Contains Corrosion Inhibitors: Yes
Contains Ethylene Glycol: No
Contains Lubricant: No
Contains Stop Leak: No
Lubricant Type: No
Manufacturer Warranty Compatibility: No
Non-Toxic: Yes
Radiator Material Compatibility: all cooling system metals
4) Removed Coolant reservoir and Cleaned and filled with Honda Type 2 Blue Coolant.
5) put back the drain bolt and put back bottom radiator hose.
6) Filled system with Honda Type 2 Blue Long Life Coolant.
7) Used Coolant Funnel Spill-free kit that gets all the AIR OUT.
Hondas are can IDLE funny if there is Air in the Coolant.
8) Filled the reservoir up to the Cold / Full Line and then turn on and with heat that was already on, however this time I set it on HOT b/c it was on COLD...
Then saw there was no leaks and drove it and came back it the reservoir was on FULL / HOT