Oversized Bosch available?

[Augustus]

The recommended oil filter for my 2005 4Runner (1GRFE V6) is the Denso 90915-YZZD3.
The recommended PureOne is the PL10241, which is shorter than the 90915-YZZD3.
The recommended BoschD+ D3330 is the same approx size as the PL10241.
I've read here that the larger PureOne PL20195 could be used in place of the smaller PL10241.
What would be the larger equivalent for the Bosch D3330?

I want a better filter than, but the same size as, the Denso- which requires a non-recommended larger P1 or D+ filter.
Or should I just stay with the larger recommended Denso to avoid any engine/oil filter warranty problems? Thanks in advance.

 

[barlowc]

DENSO filters are very good. I've been using their aftermarket "First Time Fit" filters since my factory fill came out. The following link has one that I cut open:

https://bobistheoilguy.com/forums/threads/denso-150-1010-cut-open-pictures.129559/

 

[Colt45ws]

Look up the filter to a 2001 Ford F150 w/ 4.2L V6 under Bosch. That one is going to be a PH3600/PL20195 filter.

 

[tinmanSC]

I'm currently running the PL20195 (see my signature). This longer filter probably is the extended Bosch filter. My reason for thinking that is because Purolator makes the larger Bosch extended drain filters (Distance+). Since this is the case, the larger equivalent of the Bosch D3330 would seem to be the PL20195. In face it wouldn't surprise me if the D3330 was the PL20195.

 

[HTSS_TR]

Bosch 3422 equivalents to PureOne PL20195. I used both on my LS400.

 

[ZeeOSix]

Originally Posted By: HTSS_TR
Bosch 3422 equivalents to PureOne PL20195. I used both on my LS400.


+1 ... and the 3330 is the shorter filter equivalent to the PL10241.

 

[cbear]

If you have the room, you can go all the way to the equivalent Fram PH-8A sized filter. Should be a PL30001.