Did some searching based on recommendations here on a better filter for my truck. Was able to find these at Part Source for fairly cheap actually. I’m seeing what the hype is about. These are a super nice filter especially for the money. Really impressed with the quality and cost. I bought all 3 that the store had (these are really hard to get up here in Canada it seems unless you pay a fair bit for them and order online). I’ll be using these in my 2018 ford coyote 5.0 truck for full intervals as dictated by the oil life monitor.
OE+ Pro Series PRS10575 virgin cut
- Thread starter advocate
- Start date
In November I cut apart one of these OE+ filters and compared it to a Hyundai filter. I maintain 2 Elantras. The OE+ filter looked good but the inside diameter of the centre tube was very large on the OE+. This made the effective size of the filter media much smaller than the Hyundai. Not saying this is true in this case, but you might want to cut the media from the filter and measure it. Nice pictures.
Looks Premium Gaurd. Great filters.
Great looking filter!!
You found a Premium Guard in Canada and for no more than we pay in the US. Nice work!
Once my $3 Fram TG filters are used up, I will give these filters a try. Thanks for the photos.
BrendanC
$100 site donor 2024
gorgeous premium guard. PG for the win
Patman
Staff member
I noticed that these filters are currently on sale at PartSource. I’m going to see if they have one in stock for my Corvette. Even though I can get the Carquest Premium for a couple of bucks cheaper here, the one thing I don’t like about it is that none of my filter cap wrenches fit the CQP for the Vette. So when I put the last CQP on the Vette I wasn’t able to tighten it up as much as usual as there isn’t enough room to really grip it by hand (I normally would tighten it a bit more with the end cap wrench)
Bring your filter cap wrenches with you for a fit check.
