new project humvee waste of money

Personally I'd try to get solid doors for it, the ones with the thick bullet proof glass and a turret.

Turret.webp
 
Personally I'd try to get solid doors for it, the ones with the thick bullet proof glass and a turret.
The company I worked for did development on the transparent armor in these. Armoring up will kill your mpgs.

What is super cheap money and very low miles?
Didn't your mother teach you it's impolite to ask what something cost?? 😖
 
Personally I'd try to get solid doors for it, the ones with the thick bullet proof glass and a turret.

Weird that the turret is completely uparmored but not the doors and windows. The doors on the uparmored ones are nearly impossible to open/close if the humvee is leaning at any angle. Any fingers caught in the door is being cut straight off.
 
I always wanted one of these. Just got it off a military auction non runner for super cheap money and very low miles.

Lets see what this turns into

Sweet ride. Doug Demuro had one. He loved it but said it was slow. I always wanted one with the intent of swapping it to a manualn then letting Banks power get ahold of it.
 
Sweet ride. Doug Demuro had one. He loved it but said it was slow. I always wanted one with the intent of swapping it to a manualn then letting Banks power get ahold of it.
Again-refer to what I said above. The HMMWVs have single handedly kept GEP in Moraine building new 6.5s (with forged cranks & other updates). I still have a brand new 24V military surplus 6.2 IP around here someplace!
 
The original plan was to purchase of of these with a duramax swap
https://www.planbtrucks.com/

to replace my h2 which i love but wanted tougher


1=I found a local place that is going to look it over and report back
https://blackdogcustoms.com/

then comes the build and which direction to go.

I have a fairly large budget for this one hoping to keep it under 100.
 
Pulled a lq9 headed for a rebuild

from a hot rodded turbo truck to a na torque monster. Sending out for a rebuild 408 callies and all the good stuff inside cam motion cam btr springs and worked over heads(243's)
 
Back
Top Bottom