Mobil 1 and specs

[TR3-2001SE]

Mobil 1 5&10W-30 are rated ACEA A1. Mobil 1 0w-40 is rated ACEA A3 which is suppose to be a higher rating. Why do the used oil analysis of the 10w30 show lower ware numbers than the higher rated 0w-40??

 

[buster]

Thats a good question, one I've been wanting to ask. It might have to do with HT/HS. Mobil 1 0w-40 meets the long life MB spec but I'd have to say that Mobil 1 10w30 is one of the greatest oils you can buy, bar none.

 

[Dr. T]

Where are the used oil analysis you're referring to? Are they in the same car with the same amount of miles under the same conditions?

 

[Jay]

ACEA A3 is not a "higher" rating than ACEA A1. It's a different rating. The two categories have different criteria that are mutually exclusive of each other. That is, an oil can't own ACEA A3 and A1.

 

[TR3-2001SE]

Yes! Jay Please explain these two rating differences.

 

[mormit]

Check out this thread: http://theoildrop.server101.com/cgi/ultimatebb.cgi?ubb=get_topic;f=8;t=000333

Includes a link to ACEA where you can read the specs in PDF format.

Just looked at Mobil's site. 10w30 is rated A1 and A5. 0W-40 is rated A3. A1 and A5 apply to low friction, low viscosity oils with the A5 rating specifying that the oil be stable and stay in grade (see ACEA for the details). A3 is for a stable, low friction oil but of higher viscosity.

 

[TR3-2001SE]

OK here is the link to the ACEA information.
It appears that ACEA A1 oils have to meet an improved milage test A3s do not. A1 oils are required to have a lower ash content. A3 oils have to meet a higher sheer stability test. Do I have this right? http://www.acea.be/ACEA/20020618PublicationsOilSequences.pdf

[ May 16, 2003, 10:07 PM: Message edited by: TR3-2001SE ]

 

[Ken2]

quote:

---

Originally posted by Jay:
ACEA A3 is not a "higher" rating than ACEA A1. It's a different rating. The two categories have different criteria that are mutually exclusive of each other. That is, an oil can't own ACEA A3 and A1.

---

A3 doesn't have a fuel economy requirement and allows for 0.2% more sulfated ash max limit. Other than that, A3 ratings are superior to A1, and nothing says that an A3 oil can't have the fuel economy rating and the lower sulfated ash of A1 or A5. Look at 1.2, 1.3, 1.4, 2.1, pages 5 & 6 of http://www.acea.be/ACEA/20020618PublicationsOilSequences.pdf


Ken

[ May 16, 2003, 10:19 PM: Message edited by: Ken2 ]

 

[G-MAN]

quote:

---

Originally posted by Ken2:

quote:

---

Originally posted by Jay:
ACEA A3 is not a "higher" rating than ACEA A1. It's a different rating. The two categories have different criteria that are mutually exclusive of each other. That is, an oil can't own ACEA A3 and A1.

---

A3 doesn't have a fuel economy requirement and allows for 0.2% more sulfated ash max limit. Other than that, A3 ratings are superior to A1, and nothing says that an A3 oil can't have the fuel economy rating and the lower sulfated ash of A1 or A5. Look at 1.2, 1.3, 1.4, 2.1, pages 5 & 6 of http://www.acea.be/ACEA/20020618PublicationsOilSequences.pdf


Ken

---

The only differences between A3 and A5 are the HT/HS numbers and the fuel economy requirement (if I remember correctly.)

 

[TR3-2001SE]

Then this would mean an oil could have an A1 rating and an A3 rating???

 

[G-MAN]

quote:

---

Originally posted by TR3-2001SE:
Then this would mean an oil could have an A1 rating and an A3 rating???

---

No. A1 oils can have a max HT/HS of 3.5, while A3 oils have to have an HT/HS of >3.5.

 

[TR3-2001SE]

Thanks guys! I believe I have it now and much thanks to all of you

 

[Roger]

G-Man II If an oil can't meet both A1 and A3, how come Schaeffer's #703 Supreme claims to do just that? What am I missing?