We can absolutely post VOA’s on these. I am at the Knoxville Nationals so it will not be until I get back in the plant.
High Performance Lubricants PCMO Series
- Thread starter High Performance Lubricants
- Start date
-
- Tags
- hpl
We can absolutely post VOA’s on these. I am at the Knoxville Nationals so it will not be until I get back in the plant.
That would be awesome. And no worries.
I don't see the Premium or Premium Plus 0w16 in the webstore link.
So, what's Premium vs Premium Plus?
Your answers are already contained in this thread. Please read !
No it doesn't. So, PP has PAO, so, what's the other 2 oils? Group III Hydrocracked or GTL with the Group V Ester base stocks?
Also, the thread does not specify the link for getting 0w16.
Maybe try not to be condescending to others hiding behind a keyboard
Yes it does.
See posts #2, #3, #13 & #14.
David, I'm excited to see these PDS's finally released to the public. That Premium Plus 0W-40 with a -72*F pour point and 3.9 HTHS looks like an outstanding all-around oil.
I said "Please read."
Is that "condescending ?"
Also, I was patient and respectful enough to direct you towards specific posts.
Hope this helps.
For the record, I have used two cases of HPL, and find this to be a stellar company.
Additionally, see post #21...VOAs coming soon.
Last edited:
We use group III, III+, IV, and V in varying concentrations in these oils. It is really important to look at what the oil does more so than what it is. The correct balance returns long life, great elastomer compatibility, and clean engines, while being GDI friendly.
We will have the additional oils on the web store as soon as we can. I think at the end of the day when you consider the life of these oils the cost/benefit is pretty good.
- Joined
- May 27, 2002
- Messages
- 653
Where do your oils come in on low - mid - high saps?
This website is the one you advertised above. They do not appear to sell any variety of 0W-20. Is there a distributor you recommend to buy 0W-20 from?
They sell a 20-grade, does your area get below -35F or so?
We have 2 0w20’s and they are in the series that has yet to be posted. We are going to post the other series and add the pictures later as the pictures are what is taking the time. That web link is the correct link.
Here is the elemental information on the PCMO's
To answer the questions in advance the aluminum content comes with the high concentration of Molybdenum. It is part of that raw material. The 7 ppm Silicon is defoamer.
To answer the questions in advance the aluminum content comes with the high concentration of Molybdenum. It is part of that raw material. The 7 ppm Silicon is defoamer.
Last edited:
So why do your PDSs and SDSs require a user name and password to access them? Seems like you're trying to hide something.
Thanks.
Although the disclaimer at the bottom is concerning. "NOTE: Properties above are not a specification, they are typical and may vary."
I haven't seen that on any other manufacturers PDS.
OVERKILL
$100 Site Donor 2021
I have seen it on just about every MFG PDS.
Similar threads
- Sticky
