Good deep or semi deep sockets

[Texchappy]

I am thinking about getting some semi deep or deep sockets for my 1/4” ratchets. Suggestions?

 

[SC Maintenance]

 

[rijndael]

I'm partial to the GearWrench mids.

https://www.amazon.com/GEARWRENCH-Drive-6-Point-Length-Socket/dp/B007ZOMMF0/ref=sr_1_1?sr=8-1

 

[walterjay]

Think about how you will likely use them. Will the deep ones not allow you to get into tight spaces?

 

[Urshurak776]

The GearWrench mids linked above are great. Give you that bit of extra depth, but can still get in tight spots. Recommended.

 

[Texchappy]

I do like the look of those gearwrench and I’ve heard good things about the brand.

 

[spasm3]

Usa made Williams, I have this set. IIRC williams makes snap on.



https://www.amazon.com/Williams-JHW...55881004&sprefix=williams+1/4+,aps,199&sr=8-4

 

[Texchappy]

Usa made Williams, I have this set. IIRC williams makes snap on.



https://www.amazon.com/Williams-JHWMSMD12HRC-SUPERTORQUE-High-Polished-Fasteners/dp/B001DNYC3O/ref=mp_s_a_1_4_maf_2?crid=348R6B0K6JU1I&dib=eyJ2IjoiMSJ9.2bzZUV8q26jg8VrZTzaq63SM_zpUEtcfanFUV9b1yvmDDDgcW9QI3Q-duD-7iUbZr40YYInc_JTSVfDX2MlOINOTJ53wtLPd_WM9c7k9NAZsmqwaOtvClVjS20AQ7X10Oj1l1dXmpVtGP3cWeWYZZJSaHE96_GyrbylGzRuCnCevI-2YIM5q3iBaploFQ7eDEXPhQ4CfS2BAWZ5yKKTteA.gR-dMlsLp0EhwqRZiws9vfnjTkK0OS2Zj3hsaI_4sJc&dib_tag=se&keywords=williams+1/4+socket+set&qid=1755881004&sprefix=williams+1/4+,aps,199&sr=8-4

That’s what my standard sockets are (as well as the round head ratchet). I didn’t think they were still made here for some reason.

 

[BigCahuna]

Depends. Are these for just once in a while usage, or or you going to earn a living with them ?. For home use, you might get a better deal with one of the large sets with every size any type socket you'd ever need.,,

 

[Texchappy]

Depends. Are these for just once in a while usage, or or you going to earn a living with them ?. For home use, you might get a better deal with one of the large sets with every size any type socket you'd ever need.,,

Definitely not earning a living with them.

 

[spasm3]

That’s what my standard sockets are (as well as the round head ratchet). I didn’t think they were still made here for some reason.

Some of Williams are usa, some are Taiwan . The 12 point williams set is Taiwan.

 

[cptbarkey]

HF only makes semi deep in 3/8ths. Not many make 1/4 semi deep.
I have the Gearwrench 3/8th mid set and use it very often vs others.

 

[Urshurak776]

This is the 3/8 set:

https://www.amazon.com/GEARWRENCH-D...8d-93e9-186dd0bc5df9&pd_rd_i=B00829RMAM&psc=1

 

[Fair enough]

I am thinking about getting some semi deep or deep sockets for my 1/4” ratchets. Suggestions?

Husky from HD or Proto from Amazon.

 

[johnD2]

View attachment 296622

Thanks for the ad..If you screen shot the coupon/barcode on your phone they will still honor the ad until tomorrow night. Even though they are not advertised "on sale" in the store anymore.
I picked up some 3/8 semi deep metric Icon' for $26.

 

[PKFan]

For comparison, I just picked up the Quinn 1/4" deep metric set from HF ($7.19 with coupon). They're noticeably lighter than my older Craftsman ones. I did not compare, but suspect that the Icons are more stout. For my purposes, the Quinns will likely be fine at 1/3 the price.

 

[Cherrybomb]

I have some Proto,from Zoro,very high quality,extremely satisfied with them.Williams would be a look,see also

 

[NYEngineer]

I have shallow, semi deep and deep, all Snap on from when I was a mechanic. I keep the semi deeps in my carry bag. I've always used them the most.
The Icons are so reasonably priced I got my son both.

 

[Bullet]

I am thinking about getting some semi deep or deep sockets for my 1/4” ratchets. Suggestions?

Lots of good suggestions already made, but if you're older I'd go with sockets that have the sizes stamped well and kind of large as they're easy to see with aging eyes.

 

[TomYoung]

I think that the real question is whether you can spring for Icon, or go for Quinn,