My fuel tank on the mower is 2.5 gal. I have a whole bunch of old 2.5 gal ones but all the filling spouts on them are gone. So I just got a bunch of caps and use a big funnel. Can't seem to find new 2.5 gallon containers.
I got these. Can't see paying more for an ill fitting spout than I did the can originally. And they seal unlike the spouts.Try this maybe...???
or this...
Just my $0.02
Good Lord! That's about the same size tank as most small cars these days. You must be able to mow all summer...My zero turn holds 12 gallons of fuel so i only use the 5 gallon motocross cans anymore. I use a 1 gallon chilton P10 can for 2 cycles i recommend ebay for those you can buy them at a reasonable price.
Not really but i wish it could.Good Lord! That's about the same size tank as most small cars these days. You must be able to mow all summer...
Just my $0.02
Zero turn with a v8??My zero turn holds 12 gallons of fuel so i only use the 5 gallon motocross cans anymore. I use a 1 gallon chilton P10 can for 2 cycles i recommend ebay for those you can buy them at a reasonable price.
A 25hp-27hp equipped 60” zero turn will burn close to five gallons to mow 3 acres.Good Lord! That's about the same size tank as most small cars these days. You must be able to mow all summer...
Just my $0.02
54.6 cu. in or 896 cc Briggs & Stratton vanguard big block.Zero turn with a v8??
Condensation will only happen in a sealed container if the fuel had water in it from the get go. If it is sealed moisture can't get in and there should be no condensation. Problem here is storing E10 for 7 months, and especially in a can that isn't air tight.condensation maybe if it's not vented?
Just my $0.02