See if any of those have been cut open lately. These Champ/Fram's have a leaf spring leak issue if they've not been stamped correctly. If you can visit Oreilly's they have some Microgard branded filters for as low as $5.79.
The only problem I see is they ain't green.That issue should not be in play with a fiber endcap filter. JMO.
That could be the case, I don't know if this one is fiber or not but thought I'd make OP aware.That issue should not be in play with a fiber endcap filter. JMO.
GM orange sells a lot of filters.The only problem I see is they ain't green.
That could be the case, I don't know if this one is fiber or not but thought I'd make OP aware.
GM orange sells a lot of filters.![]()
Yes, but to be clear, not on every model. Here is a PH4967. I use the similar Super Tech ST4967 version minus the silicon ADBV. I just wish they ditched the fiber end caps but that's not to say they don't work.Fram PH series (Extra Guard) and TG series (Tough Guard) still use fiber endcaps.![]()
Have we tested the seal of the bypass on these yet? And or the microgard from oreilly?
The MicroGards use a coil spring, and C&Ps of the Pentius shows a coil spring too. So no leaf spring seal to leak.Have we tested the seal of the bypass on these yet? And or the microgard from oreilly?
Sadly the new champ labs/supertech style bypass leaks. I had hope for them.The MicroGards use a coil spring, and C&Ps of the Pentius shows a coil spring too. So no leaf spring seal to leak.
As Zee mentioned not a leaf spring design but a coil spring. I have tested the actual bypass valve on the Microgard Select and Pentius filters and found no leakage.Have we tested the seal of the bypass on these yet? And or the microgard from oreilly?