extreme cold pending for DFW...

Everyone is breaking out the Patagonia and Northface gear here.
We sent some winter jackets and coats to relatives & friends in Northern Thailand. They've been having a cold spell and it's been highs in the low/mid 50s F. They just can't get the quality of jackets we take for granted in the US and Canada for anything near a reasonable price. Cost us less to buy and send a dozen jackets by mail than for them to purchase cheap stuff from China there. Yeah, the area of Thailand where my wife grew up averages 50s in Winter. I remember the Army going to small villages in the mountains with blankets and heaters to rescue people during a cold spell when I worked there. Temps are pretty mild to us, but hypothermia kills at 50F.
 
Pardon my ignorance but I’m a LONG ways from south Texas. What is the typical heating situation for a home there? Would it be a forced air natural gas furnace? Or more likely electric like baseboard heaters and mini splits?
I've lived in the south. Lots of heat pumps. Not a lot of natural gas furnaces. Sometimes you can kick the heat pump into high gear with some heat strips built in but those are much lower efficiency.

It's interesting having grown up with a heat pump and wishing I had a furnace, now the heat pumps are making a comeback and are even viable in places like Minnesota and other places in the far north.
 
Are the Canada guys here laughing at this storm? Or is this storm bad?
We had an exchange Canadian pilot who was really funny with his snow jokes. He said make sure you clear a 12" x 6" patch in the snow on your windshield before you drive. Don't bother with the back window, you don't need to see what you already drove by. If you have 4x4 go as fast as you want, there's always a telephone pole or ditch handy to stop you.
 
1769297141981.webp


They need to be playing this nonstop on TVs in the south.
 
Do you just use a bonding plug, or ground your Genny? Or your furnace doesn't care?
I was wondering the same thing. I have a Predator 3500 inverter generator for outages and had considered putting a plug on one of the furnaces but think I’d need a bonding plug for it to work. I know the Tesla won’t charge on my generator the way came from H Freight so I’d assume the furnace would say no as well.
 
Do you just use a bonding plug, or ground your Genny? Or your furnace doesn't care
removed the neutral bond in the generator, wired up with a NEMA 14-30 through 10/4 so the only bond is in my panel as it should be. 9kw starting harbor freight predator genny.
 
removed the neutral bond in the generator, wired up with a NEMA 14-30 through 10/4 so the only bond is in my panel as it should be. 9kw starting harbor freight predator genny.
I have a ground wire from my panel, to the outlet , and through the cord to the 220v outlet on my genset. A ground wire on the generator is connected to the frame. Everything seems to work fine, well pump, furnace etc. Is this correct?

IMG_20260124_201200865.webp
 
It's going to be a really bad ice storm. An inch of ice on everything is catastrophic. Downed power lines. Many will be without power for a while. It's not just people being wimpy about some cold or a little snow. It's much more than that.
Being from Wisconsin all my life I'd take a foot of snow over a inch of ice any day of the week. Inch + of ice is no joke anywhere you live.
 
Well, I have driven in the northern US, Canada, Russia, Romania, etc, etc … so, I’ll pass on your smug advice …
Smug? It’s a joke. From someone in the south. It’s from broadcast TV. I’m from the south. I would have needed that advice myself before moving to someplace it snowed.

Why is everyone here always looking to get offended?
 
Back
Top Bottom