Originally Posted by Crobinson16
Honestly I felt the same as you for a while until I decide to pull my pcv tube and air intake and seen all the oil residue going through the pcv tube and behind my throttle body, i figured installing a can may help. So i bought and installed a UPR single valve catch can kit, without the clean side separator, just the basic catch can. I didn't go for all the extras that can be added. I installed it a couple days ago , actually the night before we left for a 650 mile round trip that was a about 80% highway with a good bit of hard acceleration in and out of traffic, people ridding in the left lane really [censored] me off, and 20% city. I just got home and decide to check what or if anything was in the can for just 650 miles. I was actually surprised to see how much oil, is in the can. I know there can be water and contamination other than oil in the can. However given that I didn't really give much time for any condensation to take place it's pretty much oil . Also I had just changed the oil as well so I started with a fresh fill of Mobil 1 5w 30 EP . I can say I only wish I would have installed one sooner and my truck only has 6,500 miles on it . The kit installed in less than 10 minutes and easily removed in less time if needed. These pictures are of what the can caught in 650 miles. Also I pulled the exit hose from the can going back to the intake and it is dry so that tells me it's doing it's job. Now with all that said, some people my not feel it's a lot of oil in the can but i still don't want it going in my intake.
Hows UPR catch can quality? I was going to buy it but somehow it turned into "group buy" so im just waiting to fill all people in list.