Off a 2019 Hyundai Santa Fe 2.4L. 4,500 miles. First run with Valvoline R&P 5W-30. Filter looks good. Anti-drain back valve was pretty stiff though. Supertech MP9688 went back on with a second run of the R&P.
Ecogard X10479 C&P
- Thread starter Urshurak776
- Start date
Thanks for the c&p! Looks great
Looks good. Thank You for pics
You can sometimes get these for $2.50 on Amazon, which definitely does the trick. Nice to see that the filter looks pretty good. I have a several year stash!
- Joined
- Aug 15, 2024
- Messages
- 467
ecogard ftw- thanks for sharing!
I will. I have another MP9688 I took off my sons Kia Rio. I’ll get it cut this weekend.Pleat spacing a bit off from one side to the other but still a decent looking filter. Be sure to chop the MP if you can...
Curious how long time wise to reach 4500 miles? I ask because you mention nitrile adbv being stiff. Also, w/the upcoming MP c&p, be helpful to see a (flash)light test on the seal area. Preferably before touching the bypass piece, removing from the element.
Filter looks fine. Thanks for c&p.
Filter looks fine. Thanks for c&p.
Mid September I believe was when we did the last oil change. So, 3-1/2 months roughly.
I'll do that going forward (flashlight test.)
Just about every Ecogard jobber can filter I have cut open had a very stiff nitrile ADBV. One of the few on a KIA Soul I had that would give me a startup rattle. They are a 5K mile filter max.
