Took it in to Mazda today and they feel it, but cant figure it out. Happens, or at least is only felt, at low speeds such as pulling into the driveway, taking a low speed turn over rougher road, etc. Any thoughts appreciated.
Clunk in steering column and brake pedal
- Thread starter Nederlander75
- Start date
- Status
Also check the lower ball joints. You don't want this happening to you!
http://www.tegger.com/hondafaq/lowerballjoint/index.html
http://www.tegger.com/hondafaq/lowerballjoint/index.html
Last edited:
Ball joint, sway bar bushings or links, or control arm bushings.
Some stuff is hard to figure out, but try another shop with people that don't have glass eyes in both holes.
Some stuff is hard to figure out, but try another shop with people that don't have glass eyes in both holes.
Thanks all. I have a possible private shop I may use diagnose. Only problem I have is that I want it done under warranty.
I suspect it could be a worn out drive axle that needs to be replaced. Check the axle boots if they are torn.
- Status
Similar threads
