So my question is how bad is this? I didn't have the analysis done because of any issues, was just curious. Had it checked just for this reason. I have only had the truck for the 3k miles since oil change at 214k. No issues at all.
I just changed the oil last weekend and it looked normal, just checked antifreeze looks normal. No smoke... Should I have the compression checked? Where do I go from here. Numbers and data scared me but I seen some others with antfreeze and much higher numbers.
1988 Toyota 4Runner 22RE (2.4 4cyl)
217,762 miles on engine
3,204 miles on oil (20w-50 Castrol)
1.5 quarts added
Code:
ALUMINUM 8*
CHROMIUM 2
IRON 32*
COPPER 13*
LEAD 60*
TIN 0
MOLYBDENUM 20
NICKEL 1
SILVER 0
TITANIUM 0
POTASSIUM 24*
BORON 5
SILICON 21
SODIUM 356*
CALCIUM 1860
MAGNESIUM 13
PHOSPHORUS 791
ZINC 1036
BARIUM 0
PROPERTIES
cSt Viscosity @ 100°C 83.0
SUS Viscosity @ 210°F 16.28
Flashpoint in °F 385
Fuel %
Antifreeze % 0.71*
Water % 0
Insolubles % 0.4
* Indicates out of range
Thanks, for any advice.
I just changed the oil last weekend and it looked normal, just checked antifreeze looks normal. No smoke... Should I have the compression checked? Where do I go from here. Numbers and data scared me but I seen some others with antfreeze and much higher numbers.
1988 Toyota 4Runner 22RE (2.4 4cyl)
217,762 miles on engine
3,204 miles on oil (20w-50 Castrol)
1.5 quarts added
Code:
ALUMINUM 8*
CHROMIUM 2
IRON 32*
COPPER 13*
LEAD 60*
TIN 0
MOLYBDENUM 20
NICKEL 1
SILVER 0
TITANIUM 0
POTASSIUM 24*
BORON 5
SILICON 21
SODIUM 356*
CALCIUM 1860
MAGNESIUM 13
PHOSPHORUS 791
ZINC 1036
BARIUM 0
PROPERTIES
cSt Viscosity @ 100°C 83.0
SUS Viscosity @ 210°F 16.28
Flashpoint in °F 385
Fuel %
Antifreeze % 0.71*
Water % 0
Insolubles % 0.4
* Indicates out of range
Thanks, for any advice.
Last edited: