Any recent submersible well pump replacement quotes?

[Dinoburner]

Here we have a jet pump in the cellar with the jet in the well, a 3/4 HP Goulds. The well is 150 feet deep with the jet at 100 feet with a 50 foot tail pipe,
the most water can be pulled is 27 feet. Pushed is determined by the power of the pump.

 

[Chris142]

Wow! Here in Arkansastan, we can hit water at 3-50 feet.

I assume it rains more there than here.

 

[Propflux01]

I assume it rains more there than here.

Just a high water table. Another reason we have no basements here.

 

[oilboy123]

The cost to drill a well here has gone insane. $125+ per ft

I think our well is 160 ft. So that would be $20,000 for it! That is crazy........

When we bought the house 2016 the inspector for the well said the well pump should be replaced. The house was built in 1993. So I'm thinking it is time for a new pump, tank etc. Looks like a galvanized T used on the copper pipe connecting the water tank to the house plumbing.

Living on borrowed time.

 

[Exhaustgases]

And why not replace it yourself? And wow at that price to have a well drilled, I'd just buy the rig and then sell it when done. Because drilling a 600 foot dry hole would not be a fun thing to pay for.

 

[walterjay]

A drilling rig costs about 1.2 Million dollars

 

[Kruse]

My submersible pumps sits right at about 100 below the ground. 20 years ago, my pump cost about $350. About a year ago, I had mine replaced for about $1800. That included them sending 5 guys out to help me pull up the pump where the lines were full of water. They also replaced the wiring and the indoor contact switch.
Just make sure your replacement pump is American-made and not from halfway around the world where there are no lead standards in the pump manufacturing.

 

[Skippy722]

My well is shallow for my area at 300ft. Farther up the hill wells are 600+ with the deepest Im aware of being 800.

Good lord! My well is deep for my area at 160ft. Most of my neighbors are in the 40-80ft range! Static water level is 60ft and it supported 20gpm for an hour though… granted that’s according to the record from 1988.

 

[Chris142]

I think our well is 160 ft. So that would be $20,000 for it! That is crazy........

When we bought the house 2016 the inspector for the well said the well pump should be replaced. The house was built in 1993. So I'm thinking it is time for a new pump, tank etc. Looks like a galvanized T used on the copper pipe connecting the water tank to the house plumbing.

Living on borrowed time.

I was quoted $60k to drill mine 400 ft 4 or so years ago

 

[oilboy123]

I was quoted $60k to drill mine 400 ft 4 or so years ago

At what point will drilling/installing a well surpass the price of the house/property?

 

[Exhaustgases]

A drilling rig costs about 1.2 Million dollars

I didn't say it had to be brand new, I've seen them forsale on occasion for around $30K and sometimes less.

 

[Chris142]

At what point will drilling/installing a well surpass the price of the house/property?

According to the www. House is worth $341

 

[walterjay]

I didn't say it had to be brand new, I've seen them forsale on occasion for around $30K and sometimes less.

Only problem is you have to obtain a permit to drill and only a licensed well driller can do that and drill.