New to me Husqvarna rider with 19hp Kohler. Says 10w30 on the sticker, but I was wondering if Rotella t6 5w40 would be fine to use? Trying to narrow down the different types of oil I keep around, and I already use the 5w40 in the push mowers and side by side.
5w40 instead of 10w30/
- Thread starter Dieselanddogs
- Start date
Yes.
yes just use the 5w-40.
Thanks for the replies. I was a little surprised at the filters costing almost double what the filters are for my wife's car, but it's only about once a year so I can't complain too much.
several options out there for filters besides the Kohler if price is a concern. I have used Motorcraft, Purolator and Super Tech on my 15HP Kohler.
Do the Kohler's use the 3614 size filter like briggs?
- Joined
- Jan 23, 2025
- Messages
- 61
From all I've read, many people have been using Rotella T6 5W-40 in their Kohler engines for decades and swear by it.
Myself, for summer use, I would use what is recommended, 15w-40 would be fine too.. You might notice a puff of smoke out the exhaust when the engine first starts using 5w-40.
4WD
$50 site donor 2025
My Series 5400 does - will even hold the 3600 vertical
That is what my 15hp Kohler takes. I tend to use a ST3614 or an FL400S.
Used SHELL Rotella T-6 5w-40 full synthetic for a BOLENS riding mower with the B&S 13.5 H.P. with no issues . Also in the CHAMPION generator during the warmer months . There are decent rebates at the SHELL site for the T6 5w-40 and T6 MV ( Multi Vehicle ) 5w-30 synthetic . Link is below .
Last edited:
run it. all will be well.
Yes, but 15w-40 RT6 might be a better choice where you live. It's what I run in my rider up here in Pennsylvania. A 15w-40 oil is required to have a higher HTHS viscosity than a 5w-40. Higher HTHS is what you want in OPE running in warm temperatures.
