We recently bought a 2013 Venza XLE AWD with the 2GR-FE 3.5l V6 with less than 9,000 miles. Although it's in an odd niche of being a wagonish/CUV type of vehicle, the wife loves it. It was originally sold in the summer of 2013 so it's 3½ years old with very low miles and is in like-new condition as expected.
Anyone have any experience with these and what to look out for? The 2GR-FE engine seems to be solid from what I can tell, along with the rest of the vehicle but I don't see much on the AWD system.
However, there is this on the auto trans. I initially read that the U660E automatic trans is reliable, however I found an article about a trouble area. http://etereman.com/blog/toyota-transmis...lly-been-solved
The transmission has a ridiculous service interval of 120k or something like that and has no dipstick. There's also a complex fill procedure that involves a special tool and vacuum. I think I'll use my local indy mechanic for that job but my question is, have you heard of this issue and can anything be done to minimize or prevent the issue without a tear-down? Doesn't seem there would be, other than babying it to keep the torque from aggravating it. I'm thinking 30k mile trans service and possibly Lube-Gard for now. Any thoughts on that?
I already purchased an oil filter tool from MotivX which appears to be necessary.
I perused the ToyotaNation forums and I know this isn't exactly an enthusiast vehicle, but are there any other useful forums?
Thanks for any and all replies.
Anyone have any experience with these and what to look out for? The 2GR-FE engine seems to be solid from what I can tell, along with the rest of the vehicle but I don't see much on the AWD system.
However, there is this on the auto trans. I initially read that the U660E automatic trans is reliable, however I found an article about a trouble area. http://etereman.com/blog/toyota-transmis...lly-been-solved
The transmission has a ridiculous service interval of 120k or something like that and has no dipstick. There's also a complex fill procedure that involves a special tool and vacuum. I think I'll use my local indy mechanic for that job but my question is, have you heard of this issue and can anything be done to minimize or prevent the issue without a tear-down? Doesn't seem there would be, other than babying it to keep the torque from aggravating it. I'm thinking 30k mile trans service and possibly Lube-Gard for now. Any thoughts on that?
I already purchased an oil filter tool from MotivX which appears to be necessary.
I perused the ToyotaNation forums and I know this isn't exactly an enthusiast vehicle, but are there any other useful forums?
Thanks for any and all replies.