Working at Honda up until this spring we had the great Japan made filters... Now all we get is the made in USA Honeywell that's well, not as good as the Japanese made ones. What's everyone like to use on their Honda... Wix? Carquest Premium? Amsoil?
What's everyone using on their Honda?
- Thread starter KoolG6
- Start date
I've used a lotta Honda, which is a fram with a better seal, I believe. Starting to use the Premium Guard filters now.
BrendanC
$100 site donor 2024
i use OG wire backed Fram Titanium 3593a’s on my accords. I install nothing but carquest premium/extended protection on friends/family and the fleet. they have treated me well so far. look up the many CQ premium 84502 or 84356 C&P’s.
Wix mostly.
My s2000- OEM only, CRV- anything
Pentius PLXL7317. Case of 12 is $68 ($55 in July) on Amazon. Made in South Korea.
Fram Ultra for the oil, OEM Honda for air.
CleanSump
Site Donor 2026
Last time was a FRAM Tough Guard TG7317.
Honeywell hasn't owned FRAM in many years. 2011 to be exact.
13' CRV gets pretty much whatever. I use OEM / Bosch / Mahle / Renken. 3K oil and filter changes. I bought it new, and haven't had any issues using those short intervals.
Always used the Honda 15400-PLM-A01 when it was made by Filtech, excellent filter then Honda went with the 15400-PLM-A02 which was disappointing. Used the Mobil1 M110a when it was Champion made, went back to the 15400-PLM-A02 during the Mann-Hummel debacle. Recently changed from Mobil1 5W-30 EP to Amsoil Signature 5W-30 and naturally tried their EA15K13, Champion made which i find is now involved in another huge bankruptcy debacle and having quality issues as well. Until that gets sorted, I'm going back to the Mobil1 M110a which is now (sadly) made in South Korea but apparently good quality. There's apparently a decent filter made in Vietnam by Micro Guard available at O'Reilly but no stores nearby. Filters continue to be a game of Wack-A-Mole. I'm actually hoping Amsoil goes to Filtech if they have to choose a new supplier.
Last edited:
- Joined
- Feb 6, 2025
- Messages
- 690
I think right now Premium Guard is the way to go for everything if they have one for your application.
Genuine Honda oil filters. $6.84/ea shipped including the crush washer from Bernardi Honda if you buy a 30-pack. Price is hard to beat and no one can ever yell at you for using the "wrong filter."
Currently using:
FRAM Ultra Synthetic XG7317 from W*M
SuperTech ST or MP 7317 from W*M
FRAM TITANIUM #FS 7317 from AAP
CarQuest Premium(BLUE) #84356 from AAP
Purolator ONE-PL or BOSS-PBL #14610 from AAP
That's about it for now!
The W*M & AAP who in my neck of the woods are right across the street from one another, as is AZ and only about 3+ miles from my home. But I almost never shop at AZ. Maybe once every 2-3 years.
FRAM Ultra Synthetic XG7317 from W*M
SuperTech ST or MP 7317 from W*M
FRAM TITANIUM #FS 7317 from AAP
CarQuest Premium(BLUE) #84356 from AAP
Purolator ONE-PL or BOSS-PBL #14610 from AAP
That's about it for now!
The W*M & AAP who in my neck of the woods are right across the street from one another, as is AZ and only about 3+ miles from my home. But I almost never shop at AZ. Maybe once every 2-3 years.
Last edited:
Been using many US made (not Mexico) Bosch Premium 3323, basically a P1 PL14610 clone without ptfe sealing gasket and fancy paint. All have have been c&p here. Also currently running a Carquest Premium 84356 on an Accord. Last time I ran a Honda OEM, a factory A02. Been so long, can't recall last time I purchased Honda OEM.
This thread about Honda filters is up to 10 pages. You might want to check it out...
- Joined
- Mar 10, 2025
- Messages
- 79
I have two Hondas, both 2011: K24 and L15. I have a bunch of Premium Guard relabeled/variants in the longer 4610 and shorter 4612 and some Wix econo-line Protec PLX57356, also long like the PG4610s. All of these are made in PRC and have circular holes.
- PG4610 (EcoGard, Premium Guard)
- Parts Plus PH2876 (cross PG4612)
- Protec PLX57356
Similar threads
