What are you working on today?

Replaced rad cap, now the system could actually hold pressure. Then a radiator side tank let go. Fixed that. Then the plastic t-stat housing let go.
the radiator in this thing is original. The OEM Motorcraft cap has been holding pressure but there’s a crack on the big seal.
 
  • Wow
Reactions: D60
the radiator in this thing is original. The OEM Motorcraft cap has been holding pressure but there’s a crack on the big seal.
I predict radiator failure soon. You heard it here first. Not wishing this on you.

I built a basic tube bumper for this '02 ;)
IMG_20200516_173907200.webp
 
Adjusted the valves on the scooter. Of course ordered a set without a 0.12, only .10 or .13. The intakes the .13 was tight but ok, the exhausts even the .10 wouldn’t ft. Adjusted them out a bit. Changed the oil after, 5w40 Mobil Delvac.
 
  • Like
Reactions: D60
New vehicle purchase, my local county retired a 2015 Grand Caravan. Drove it to the ranch from the county annex. 104k on the odometer, everything works. New Walmart AGM battery installed. I need to replace the passenger side headrest, spill/fill of the trans, brake fluid and thats about it. Will take a closer look at the oil cooler but I think its probably ok. It will be assigned to one of my kids in the near future.

View attachment 347876
Had one of these as a loaner. I loved it. Loved it. It had the lighting package and roll down windows in the back and got killer gas mileage, mid-upper twenties. If I needed a van and couldn’t have a newish sienna (which I think are superbly executed), this would be the one.
 
Had one of these as a loaner. I loved it. Loved it. It had the lighting package and roll down windows in the back and got killer gas mileage, mid-upper twenties. If I needed a van and couldn’t have a newish sienna (which I think are superbly executed), this would be the one.

This is the third Pentastar Caravan my immediate family has owned, and my parents bought every generation since 1990. The first one (fully loaded RT) had a cylinder head failure around 70k. We eventually sold it off, Dodge did replace it under warranty. Our ranch property has a 2014 with only 48k on it, zero issues. I have 3 kids, so yet another van might be in the future as they will be off to college soon.
 
My current "big" project is redoing the interior of the NSX. Just about everything I've pulled out has had broken tabs, clips, etc. I will be working on either repairing or replacing all of it. Some of it will be pretty simple, some of it I can get new, and some of it will probably require 3D scanning and printing, which will be a new skill for me (or I'll pay someone).

1784202848412.webp
1784202943239.webp



Yesteday, I started work on recovering the seats. Definitly not finished, but the leather is in position and I'm hoping that a few days in the hot shop will stretch it a bit!
1784202977931.webp

1784203027718.webp

1784203060368.webp
 
Back
Top Bottom