- Joined
- Jul 28, 2024
- Messages
- 1,518
Did a dryer and vent cleaning for a friend replaced an open thermal. The Culprit
What are you working on today?
- Thread starter Amkeer
- Start date
I opened my thermals once, but it resulted in a restraining order.
Rotated the tires on the wife's Durango, 88,454 miles on the Michelins and the original three gauged at 7/32" surprisingly (6249 miles on this rotation). A couple weeks back I did have to swap out a plugged tire, for another Michelin it has 10/32" on it. Probably replace them all in the winter timeframe I suspect and keep the good one for back-up. Got to use my new Astro Pneumatic Digital Tire Inflator when adjusting tires pressures. Made the kids vacuum out the Durango for their Mother to clean up their mess.
Burned all the branches and tree limbs I trimmed a last week. Split some dry wood for bonfires coming up. Rinsed the fins off on the A/C unit to clean the build up off. That was enough as the humidity was getting to me and temp's were rising.
Burned all the branches and tree limbs I trimmed a last week. Split some dry wood for bonfires coming up. Rinsed the fins off on the A/C unit to clean the build up off. That was enough as the humidity was getting to me and temp's were rising.
Slapped new Auto Extra rotors on this '01 4Runner. Was trying to save the family $ and the pads are still good. Was going to have O'Reilly turn them but my store has been severely understaffed and I lost confidence in their ability to do them quickly so my lift isn't tied up.
I finally just ordered two new closeout rotors from RA for $49.63 delivered and turning would have been $25x2
What's worse -- whatever rotor is on there now at 230k miles cut a touch thinner, or new, inexpensive rotors? I figured it's a wash with no clear winner.
Apparently this gen 4Runner is notorious for warping rotors regardless and the Tundra upgrade is popular.
I finally just ordered two new closeout rotors from RA for $49.63 delivered and turning would have been $25x2
What's worse -- whatever rotor is on there now at 230k miles cut a touch thinner, or new, inexpensive rotors? I figured it's a wash with no clear winner.
Apparently this gen 4Runner is notorious for warping rotors regardless and the Tundra upgrade is popular.