Virgin Cat 1R-0749 Cut and Post

[Creekside]

This filter had a damaged thread and wasn’t able to be fully installed. Rust is from sitting open on my truck bed for a couple weeks. I’m using these with a Donaldson filter head and the blue 10GPM Harbor Freight to supply fuel to tractors and equipment out of a 50 gallon tank on my flatbed. It’s a custom built system because most regular transfer tanks wouldn’t work like I want.

Cut with a Cat filter cutter and the can was very hard. Also there was some kind of green adhesive holding the element to the actual cap. It was glued very good to the point I had to pry pretty hard with screwdrivers to separate them.

 

[53' Stude]

This filter had a damaged thread and wasn’t able to be fully installed. Rust is from sitting open on my truck bed for a couple weeks. I’m using these with a Donaldson filter head and the blue 10GPM Harbor Freight to supply fuel to tractors and equipment out of a 50 gallon tank on my flatbed. It’s a custom built system because most regular transfer tanks wouldn’t work like I want.

Cut with a Cat filter cutter and the can was very hard. Also there was some kind of green adhesive holding the element to the actual cap. It was glued very good to the point I had to pry pretty hard with screwdrivers to separate them.

View attachment 237003

View attachment 237004

View attachment 237005

View attachment 237006

View attachment 237007

View attachment 237008

View attachment 237009

Rust! Yuck

 

[sdowney717]

Cat filters are strong, well constructed.
You can go to a 416-1225 UHE, it is 10.5" long and 1-14 thread

Cross ref gives it as 1-14 and as Primary Particle Efficiency 6.50 micron (c) @ 98.7% for 1R-0749

https://www.fleetguard.com/s/productDetails?propertyVal=FF5319&propertyField=home&language=en_US

And under 4 micron for UHE

That AHE cut open one is 5 -10 micron. All the old micron ratings are no longer recognized due to new testing standards.