BrendanC
$100 site donor 2024
Changed the valve cover and intake manifold gaskets today and in the process i’m sure i stirred some junk up so i decided with the vehicle at 93k miles and unknown maintenance history with it coming from a school district fleet prior to us, to do a liquimoly flush. it’s all i could get locally today. id rather use BG EPR but couldn’t get it fast enough.
i liked that the bypass valve was rubbery and seemed to seal against the element body very well. the tech that put it on using thors hammer so i had to destroy it to get it off. there is also a photo under the driver side valve cover
i liked that the bypass valve was rubbery and seemed to seal against the element body very well. the tech that put it on using thors hammer so i had to destroy it to get it off. there is also a photo under the driver side valve cover
Attachments
-
IMG_5314.jpeg175.8 KB · Views: 119
-
IMG_5313.jpeg219.5 KB · Views: 74
-
IMG_5311.jpeg242.2 KB · Views: 73
-
IMG_5310.jpeg172.6 KB · Views: 79
-
IMG_5309.jpeg252 KB · Views: 79
-
IMG_5308.jpeg247.9 KB · Views: 85
-
IMG_5307.jpeg248.3 KB · Views: 89
-
IMG_5306.jpeg259.2 KB · Views: 120
-
IMG_5300.jpeg214.4 KB · Views: 123