Turtle Wax Graphene Acrylic Trim Restore..

[midnightlaundry]

Turtle Wax Trim Restore is the bomb.. The top of my Rear Bumper was chalky grey colored.. This stuff brought it back. I did it twice for the Bumper.. The 1st coat looked good, but the 2nd put it over the top. I hit the Cowls, Luggage Rack, and the Wipers.. Anything that was faded black is now BLACK!.

It's windy out, so everything is a bit dusty! But you'll get the idea..

https://www.turtlewax.com/products/hybrid-solutions-graphene-acrylic-trim-restorer

 

[hrv]

Take another picture in about a month or two and see how it holds up....

 

[atikovi]

Looks good and much cheaper than Ceracote if it lasts a few months.

 

[midnightlaundry]

I've been using the same gloves for a while when I'm rubbing things out. The Trim Restore left an almost latex layer that's peeling away.

 

[dkryan]

I've been using the same gloves for a while when I'm rubbing things out. The Trim Restore left an almost latex layer that's peeling away.

View attachment 221127

That’s interesting………

As hrv stated, get back to us (September?) and let us know how it’s held up. Or not.

 

[midnightlaundry]

I rinsed it last Sunday no touch.. Just a blast at the Car Wash because the vehicle is still pretty clean. Dirt and dust just rinses off when you have a good layer of your favorite Wax..
I'm a huge fan of Ceramics.. I love the slick feel, the way they repel water and the way they shine and hold up..
I often hang my arm out the window and rub the Door just to make sure it's still slick.. LOL

I'll post a pic tomorrow!

 

[Gus_Mahn]

I put one coat of it on my F150 mirrors and back bumper about 2 months ago. Still looks great if maybe a little too shiny. Next time I’ll use masking tape, a Foam applicator and rubber gloves. IMO it’s a once at the start of the spring product. A lot of the newer Turtlewax products are pretty impressive for not too much money.

 

[RitcheyRch]

Might have to try this stuff depending on how the OP's pictures look after a few months of use.

 

[dkryan]

I just clicked on the OP’s original link, scrolled down, and read the instructions.

It says to wear gloves when applying as the product is tinted black.

It sounds somewhat like a dye. It also claims two coats are needed.

 

[tom slick]

I coated my tonneau cover a couple months ago and it is still very black.

 

[midnightlaundry]

2 week follow up.. It's a bit dusty, but the color and sheen is still there..

 

[kjMcClure]

Turtle wax has made some huge improvements in their product line. Their “hybrid solutions” is the best they offer and available at a reasonable price

 

[meep]

I gave up, pulled the cowl and bumper covers and sprayed them with rattle can bedliner

 

[We're Metals]

@midnightlaundry How is it holding up?

 

[midnightlaundry]

It was holding up right to the point where I had 2 heavy set gents jumping up and down on my Bumper trying to hook up a Boat to my Trailer Hitch.. LOL But now you can see how bad it was faded.

A little touch up is all it needs.

 

[dkryan]

While I have yet to try this product, it seems to be a “coating” that, if it encounters something abrasive (including two heavy gents dancing on the bumper), it’s going to show wear fairly quickly.

Left alone to just the regular elements and no “Dancing With The Stars,” I bet it would last longer than most trim “restore” products.

 

[midnightlaundry]

Just a little touch up!