AC worked for about 5 minutes then started blowing warm. Stopped a few minutes for errands, got in, blew cold for about 5 minutes then started blowing warm. Repeat.
Long story short, after some Internet searches, popped the clutch off the compressor and removed the smallest shim to get the air gap back to 0.35mm and it seems to be blowing cold again. Aside from needing figure out what tools I needed, about a 15 minute job. But, of course, took some tool shopping and about 2.5 hours
Long story short, after some Internet searches, popped the clutch off the compressor and removed the smallest shim to get the air gap back to 0.35mm and it seems to be blowing cold again. Aside from needing figure out what tools I needed, about a 15 minute job. But, of course, took some tool shopping and about 2.5 hours
