Red RTV sealant cure time

Status
Not open for further replies.
Joined
Mar 25, 2008
Messages
733
Location
Kansas City Metro
I am going to change the differential oil in my truck this week sometime and I will be doing it at work. After I am done I will need to drive the truck home and I am wondering if that will be okay right after finishing. I know the RTV sealant will not be completely cured by then but with still about 10 bolts holding the cover on, will I be okay?
 
From Permatex TDS:

8. Allow to set for at least two hours and re-torque at
lease one quarter to one half turn.
9. For best results, allow to cure overnight.

Source
 
Longer is better.
Not cleaning the substrates well, and short cure times before contact with oil are #1 and #2 reasons for RTV failure.

This normally does not need any special tools. Any reason to do it at work? This can be done at home, or a friend's driveway or garage.
 
I'd prefer to do it at work because we have a nice shop with a lift and all that cool stuff. I guess I will do it in the driveway at home though. Sigh.
smirk.gif
 
Status
Not open for further replies.
Back
Top Bottom