With a Box end wrench Sweet Pea!How do you remove the metal engine oil drain cover sweet pea?
With a Box end wrench Sweet Pea!How do you remove the metal engine oil drain cover sweet pea?
ive never seen that packaging before for a Fram24 Lexus GX550, 35350 miles on truck, 5150 OCI, new copper washer
Out: Castrol GTX 5w30 full syn, Fram ultra filter
In: View attachment 345190View attachment 345191
That was the "FRAM Pro Synthetic" (FPS) packaged for oil change businesses and equivalent to the OG FRAM Ultra line. Was a early to mid 2010's thing before most got blown out through bulk freight liquidators online and mainly Ebay.ive never seen that packaging before for a Fram
Nowadays I use the MityVac and swap the filter every 2nd service. Easy peasey.2022 Toyota Corolla Cross:
Out: Mobil 1 Extended Performance 0w20 with Fram Endurance Filter - Total OCI about 1300 miles ~1.5 Years.
In: Mobil 1 Extended Performance 0w20 with Mobil 1 Extended Performance Filter.
Car is still on the Ramps for now, getting through the oil change was about all the back could take right now.
I use my impact on the Jeep Renegade Trailhawk just for the skid plate. There are 3 different types of screws/bolts, 14 total holding that up. It is a pretty heavy actual steel plate.How do you remove the metal engine oil drain cover sweet pea?
That's a whole lot of vented action in that hood.2026 GR Corolla 2500km
2nd early oil/filter change ....
Out... AMSOIL Signature Series 0w-20
Toyota Filter
In ... AMSOIL Signature Series 0w-20
Toyota Filter
View attachment 345260
View attachment 345261
View attachment 345262
I use my impact on the Jeep Renegade Trailhawk just for the skid plate. There are 3 different types of screws/bolts, 14 total holding that up. It is a pretty heavy actual steel plate.
View attachment 345422
I haven't done that........yet. I recall watching the YouTube video of Watch JR Go with BG Dynamic where he used the longer reach electric ratchet so he could remove since it was right after like 30 minutes of high RPM to be drained. Spun it out quickly and kept his fingers away from the heat.I have used impacts on drain bolts too, I am sure that upsets the keyboard commando’s.
Worst I had was a Fusion Hybrid - looked like a kitchen table - gave it good lube and 10k …I use my impact on the Jeep Renegade Trailhawk just for the skid plate. There are 3 different types of screws/bolts, 14 total holding that up. It is a pretty heavy actual steel plate.
View attachment 345422